AdvertisementYour brand could be hereYour brand hereOn every Darslab page · students, parents and teachersinfo@darslab.comAsk for pricesPricesinfo@darslab.com
☰ Year plan · Science

Practical circuits

Week 35 · Unit 9 · 9.4 · 3 lessons
3

Switches and circuit choices

Workbook 9: Topic 9.4, pp. 185–190
GoalShow how switches in series, in parallel and in branches control lamps, and choose the best circuit for a job.
New words
switch · a component that makes or breaks a circuitmain wire · the wire the whole current passes through, before it splits into brancheslighting circuit · lamps joined in parallel, each with its own switch, on one supplyinterlock · a safety design in which two switches in series must both be closed before a machine starts
Explanation

A switch in series with a lamp controls that lamp. A switch in the main wire of a parallel circuit controls everything, and a switch in a branch controls only that branch. In a lighting circuit, the lamps are in parallel and each has a switch in its own branch, so every lamp has the full voltage and can be on or off by itself; a fuse in the main wire protects them all. Two switches in series work like ‘and’: both must be closed to make a complete circuit. A machine that needs its guard closed and a button pressed uses this. Two switches in parallel work like ‘or’: if either is closed, the circuit is complete. An alarm with a switch at each of two doors uses this. To choose a circuit, ask: must each part work on its own? Does each part need the full voltage? Should one failure stop the others? Is a fuse or a master switch needed? The answers usually point to a parallel circuit with a switch in each branch.

L₁L₂+−fuse
Worked examples
+−S₁S₂
Two switches in series with a lamp. The lamp is lit only when S₁ and S₂ are both closed.
S₁S₂Lamp
openopenoff
closedopenon
openclosedon
closedclosedon
Two switches in parallel with each other. The lamp is lit when S₁ or S₂ or both are closed.
JobBest circuitReason
front and rear lamp of a bicycletwo lamps in paralleleach has full voltage, and one still works if the other fails
machine that starts only when guard shut and button pressedtwo switches in seriesboth must be closed
alarm that rings if either of two doors openstwo switches in paralleleither one is enough
Choosing the circuit for a job.
Class activity

Switch lab. With an adult. You need one AA cell, two identical torch bulbs, wires or foil strips, and paper clips and cardboard to make switches (a paper clip that you can press down onto two foil contacts). Use only the cell, never a socket. Build and test, with the cell connected for only a few seconds each time: (1) one bulb with two switches in series; (2) one bulb with two switches in parallel; (3) two bulbs in parallel, with one switch in the main wire; (4) two bulbs in parallel, each with its own switch. For each, write a table of which switch positions light which bulb. Which circuit is a lighting circuit? Which one models a safety interlock? Which one models a door alarm? Predict before you test each circuit.

Practice
1
A machine must start only when the guard switch S₁ is closed and the start button S₂ is pressed. Should S₁ and S₂ be in series or in parallel with the motor? Explain.
2
In the circuit shown, S₁ is in series with the lamp, and S₂ and S₃ are in parallel with each other. Copy and complete: for which settings of S₂ and S₃, with S₁ closed, is the lamp lit? What happens whenever S₁ is open?
S₂S₃+−S₁
3
Ana drew a lighting circuit for two lamps, each with its own switch, as shown. What is wrong with it? Describe a correct circuit.
+−L₁S₁L₂S₂
4
A classroom has a master switch in the main wire and a switch in each branch. Give one advantage of the master switch, and one job for which a switch only in the main wire is not enough.