Loudness and pitch of sound; interference of sound
Week 20 · Unit 6 · 6.1–6.2 · 3 lessons
1
Big and small vibrations
Workbook 9: Topics 6.1–6.2, pp. 111–119
GoalExplain how the amplitude of a sound wave decides its loudness, and read amplitude from a trace.
New words
amplitude · the largest distance a vibrating particle moves from its rest positionloudness · how strong a sound seems to the ear; a bigger amplitude gives a louder soundoscilloscope · a device that shows a sound as a wave trace on a screenvibration · a rapid back-and-forth movement
Explanation
A sound begins with a vibrating object. It makes the air particles next to it vibrate back and forth, and they pass the vibration on, so the sound travels as a wave. Each particle moves a small distance away from its rest position and back. The largest distance it moves from its rest position is the amplitude. A bigger amplitude means that the wave carries more energy, and the sound is louder. A microphone linked to an oscilloscope shows the sound as a trace. The height of the trace above the middle line is the amplitude, so a taller trace is a louder sound. Amplitude is measured from the middle line to the top of a peak, not from the lowest point to the highest. As sound spreads out from its source, the energy is shared over a larger area, so the amplitude gets smaller and the sound gets quieter.
Worked examples
Measurement
Value
highest point above the middle line
2 mm
lowest point below the middle line
2 mm
amplitude
2 mm
Reading the trace above: the dashed lines are at 2 mm and −2 mm, and the wave touches them. The amplitude is 2 mm, not 4 mm. The distance from the lowest to the highest point (4 mm) is twice the amplitude.
Two sounds from the same loudspeaker, one loud and one quiet. In the loud sound the particles bunch together and spread apart more strongly, because their vibrations are bigger.
sound made by the source→energy spreads out in all directions→particles far away vibrate with a smaller amplitude→the sound is quieter
Why a sound gets quieter with distance. The source gives out a fixed amount of energy, and as the wave spreads, each particle receives less energy and vibrates less.
Class activity
Plucking a band, gently. With an adult. Stretch a thick rubber band round an empty cardboard box or a mug, and tape a ruler upright beside the band so that you can mark 3 mm, 6 mm and 12 mm from the band at rest. Pull the middle of the band sideways by 3 mm and let go, then 6 mm, then 12 mm. Keep your face back and never pull the band toward your face. Listen from about one metre away, not with your ear close. Rank the three sounds from quietest to loudest, and record the results in a table. Change only how far you pull the band, and keep the box, the band and where you listen the same. What did a bigger pull do to the size of the vibration and to the loudness? Repeat each pull twice. Were the results the same each time? Why might they not be exactly equal?
Practice
1
On an oscilloscope, the distance from the lowest point of a trace to its highest point is 5.0 mm. What is the amplitude? Explain how you worked it out.
The amplitude is 2.5 mm. The amplitude is measured from the middle line to a peak, which is half of the distance from the lowest to the highest point.
2
Sound S has an amplitude of 0.05 mm and sound T has an amplitude of 0.20 mm. Which is louder, and how many times bigger is its amplitude?
Sound
Amplitude (mm)
S
0.05
T
0.20
T is louder. Its amplitude is 4 times bigger (0.20 ÷ 0.05 = 4).
3
On an oscilloscope, a trace has peaks 3 mm above the middle line. A pupil turns down the volume and the peaks become 1 mm. What has changed about the sound, and what has not?
The amplitude is smaller, so the sound is quieter. The pitch (how high or low the note is) has not changed.
4
Explain why the sound of a bell is quieter to someone 100 m away than to someone 5 m away.
The energy of the sound spreads over a bigger and bigger area, so the particles far away vibrate with a smaller amplitude.