GoalDescribe what a variable resistor does, where it is connected to control a lamp or a motor, and why it is useful.
New words
variable resistor · a resistor whose resistance can be changed by moving a slider or turning a knobfixed resistor · a resistor with one value of resistance that cannot be changedslider · the moving contact on a variable resistor that selects how much of the resistive track the current passes throughdimmer · a control, usually a variable resistor, that changes the brightness of a lamp
Explanation
A fixed resistor has one resistance. A variable resistor can be set to any value between a smallest and a largest, for example from 0 Ω to 50 Ω. Inside, the current flows along a long track of resistive material, and the slider decides how much of the track the current uses: a longer track means more resistance, as with a longer wire. To control a lamp, put the variable resistor in the same loop as the lamp, one after the other. If the resistance is increased, the total resistance of the circuit rises, the current falls and the lamp is dimmer; if it is decreased, the current rises and the lamp is brighter. Variable resistors are used in volume controls, in dimmers, and in the speed controls of fans and toy motors. One variable resistor in the main wire changes the current to every branch; one in a single branch changes only that branch. In circuit diagrams the symbol is a resistor box with an arrow through it. In the diagrams on this page it is drawn as a plain box labelled ‘variable resistor’ or ‘VR’.
Worked examples
Variable resistor (Ω)
Current (A)
Total resistance = 6 V ÷ I
0
0.60
10 Ω
10
0.30
20 Ω
20
0.20
30 Ω
30
0.15
40 Ω
40
0.12
50 Ω
A dimmer circuit. A 6 V cell, a lamp and a variable resistor are in series, and the ammeter reads the current. When the variable resistor is increased, the total resistance (V ÷ I) goes up and the current goes down, so the lamp is dimmer.
Where the variable resistor goes. In this circuit it is in the branch of L₁ only, so moving the slider changes the brightness of L₁ but not of L₂, which stays joined straight across the cell.
Device
What the control changes
volume control of a radio
the size of the current to the loudspeaker, so the loudness
dimmer for a lamp
the current through the lamp, so its brightness
speed control of a toy motor
the current through the motor, so its speed
What a variable resistor changes in everyday things.
Class activity
Control hunt. With an adult. Walk round your home and school and find things that have an adjustable control, such as a volume knob, a lamp dimmer, a fan speed control or a toy that changes speed. Do not open or take anything apart, and do not touch sockets or plugs. For each one, write what the control changes, and guess whether it uses a variable resistor. Make a table with the columns Device, What it changes, Does turning it up give more or less current?. Then draw a circuit diagram for a toy fan motor whose speed can be changed. Mark in colour the part where the resistance of the circuit is changed. What does the control do to the current in the whole circuit when you turn it from bright to dim?
Practice
1
A 6 V cell is joined to a lamp of 10 Ω and a variable resistor set to 20 Ω; the current is 0.20 A. The slider is moved so that the variable resistor is 5 Ω. Find the new current and say what happens to the lamp.
The total resistance is 10 + 5 = 15 Ω, so I = 6 ÷ 15 = 0.40 A. The current doubles, so the lamp is brighter.
2
In the circuit shown, the variable resistor VR is set to a larger resistance. What happens to the brightness of L₁, to the brightness of L₂ and to the reading of an ammeter in the main wire? Explain.
L₂ is dimmer, because VR is in its branch and the current there falls. L₁ is joined directly across the cell, so its brightness is unchanged. The main-wire reading falls, because it is the sum of the two branch currents and one of them has fallen.
3
A student wants the speed of a toy motor to be adjustable from slow to fast. Should she use a fixed 10 Ω resistor or a variable resistor with a range of 0–10 Ω in series with the motor? Explain.
A variable resistor. Its resistance can be changed, so the current in the motor, and so its speed, can be set to any value. A fixed resistor would give only one speed.
4
Two identical lamps are in parallel and one variable resistor is in the main wire. The resistor is turned to a greater resistance. What happens to the current from the cell and to the brightness of each lamp? Explain.
The current from the cell falls, because the total resistance is greater. Less current reaches each branch, so both lamps are dimmer. This is different from a variable resistor in one branch, which changes only that lamp.