Practical circuits
Answers are for parents and teachers.
1
A 6 V cell, a 10 Ω lamp and a variable resistor are in series. The variable resistor is set to 30 Ω. What is the current? The slider is moved to 0 Ω: what is the current now, and what happens to the lamp?
Total resistance 10 + 30 = 40 Ω, so I = 6 ÷ 40 = 0.15 A. At 0 Ω: I = 6 ÷ 10 = 0.60 A, so the current is four times as large and the lamp is much brighter.
2
Draw a circuit for a toy fan: a cell, a switch, a motor and a variable resistor in series, so that the fan can be switched off and its speed can be changed. Label each part and say which part changes the speed.
Cell, switch, motor and variable resistor in one loop, all labelled. The variable resistor changes the speed, because it changes the current in the motor.
3
A heater has a normal current of 8 A. Which fuse would you choose from 3 A, 5 A and 13 A, and why? What would happen with the 5 A fuse?
13 A: the smallest rating above the normal current. The 5 A fuse would melt as soon as the heater was switched on, because 8 A is above its rating.
4
Write a short note ‘Why we never touch a plug or a socket and never mend a fuse ourselves’. Use the words current, wire and fuse, and say who should do the job instead.
Large currents can heat wires and cause fires or harm to a person; fuses must be the right rating and only an adult or electrician should check or replace them.
5
Design the circuit for a bicycle with a front and a rear lamp, each with its own switch and a fuse in the main wire. Draw it and give three reasons for your design.
Parallel lamps, a switch in each branch and a fuse in the main wire. Reasons: full voltage for each lamp; one failing does not stop the other; each can be used alone.