AdvertisementYour brand could be hereYour brand hereOn every Darslab page · students, parents and teachersinfo@darslab.comAsk for pricesPricesinfo@darslab.com
☰ Year plan · Science

Cooling by evaporation

Week 11 · Unit 3 · 3.6 · 3 lessons
1

Particles that escape

Workbook 9: Topic 3.6, pp. 63–67
GoalExplain evaporation with the energies of particles in a liquid, and tell evaporation from boiling.
New words
evaporation · a liquid changing to a gas at its surface, at any temperature below the boiling pointboiling · a liquid changing to a gas throughout the liquid, with bubbles, at its boiling pointwater vapour · water in the form of a gasaverage energy · the total energy of the particles divided by the number of particles
Explanation

The particles in a liquid are always moving, but they do not all have the same energy: some are slow and some are fast. A particle at the surface that has enough energy to break away from its neighbours can escape into the air as a gas. This is evaporation. It happens at temperatures well below the boiling point, which is why a puddle dries up on a warm day. In boiling, bubbles of gas form throughout the liquid, and this happens only at the boiling point, which is 100 °C for pure water at normal air pressure. Because the particles that escape are the ones with the most energy, the particles left behind have a lower average energy, so the liquid that is left becomes cooler.

FeatureEvaporationBoiling
where it happensat the surface onlyall through the liquid
temperatureany temperature below the boiling pointonly at the boiling point
bubblesnoneyes
speedusually slowfast
Worked examples
StepWhat happens
1the particles in the water have different energies
2a fast particle at the surface escapes into the air as water vapour
3the average energy of the particles left behind is lower
4the water becomes cooler and the level slowly falls
Water in an open dish at 30 °C, step by step.
0246810abcdefghenergy of each particle (units)
Eight particles in a liquid. A particle needs at least 8 units of energy to escape, so only the particle with 9 units leaves. The average falls from 4.5 to about 3.9.
ObservationProcess
wet footprints on a pavement disappearevaporation
bubbles rise through the water for pasta on a cookerboiling
washing dries on a line on a 15 °C dayevaporation
a pan of salty water at 102 °C bubbles on the stoveboiling
Evaporation or boiling?
Class activity

The drying race, with an adult. Put one teaspoon of tap water, at room temperature, on each of two identical saucers. Put one saucer on a warm sunny windowsill and the other in a shaded, cooler place. Do not use hot water. Look at both saucers every 30 minutes and record when each is dry. Predict first: which saucer dries first? Which variable did you change, and what did you keep the same? Why is it hard to say exactly when a saucer became dry, and how would repeating the test with a second pair of saucers help?

Practice
1
Describe two differences between evaporation and boiling.
2
Ten particles in a liquid have the energies shown. A particle needs at least 7 units to escape. How many escape, and what is the average energy of the particles that stay, to one decimal place? Is it higher or lower than before?
02468abcdefghijenergy of each particle (units)
3
Two wet footprints of the same size are made on a pavement, one in the sunshine and one in the shade. Which dries first? Explain with particles.
4
A student writes, ‘In evaporation the whole liquid heats up until it turns to gas.’ Correct two mistakes.