AdvertisementYour brand could be hereYour brand hereOn every Darslab page · students, parents and teachersinfo@darslab.comAsk for pricesPricesinfo@darslab.com
☰ Year plan · Science

Resistance

Week 34 · Unit 9 · 9.3 · 3 lessons
1

Resistance and the ohm

Workbook 9: Topic 9.3, pp. 180–184
GoalSay what resistance is, name its unit and calculate the resistance of a component from the voltage across it and the current through it.
New words
resistance · how much a component or wire opposes the current; the greater it is, the smaller the current for the same voltageohm (Ω) · the unit of resistanceresistor · a component made to have a certain resistance; its symbol is a rectangleR = V ÷ I · resistance = voltage ÷ current, with the voltage in V, the current in A and the resistance in Ω
Explanation

Every part of a circuit makes it harder for current to flow. This is its resistance. With the same cell, a component with a greater resistance lets a smaller current through. Resistance is measured in ohms, symbol Ω. To find the resistance of a component, measure the voltage across it with a voltmeter and the current through it with an ammeter, then use resistance = voltage ÷ current. In symbols, R = V ÷ I. A resistor with 10 V across it and 2 A through it has a resistance of 10 ÷ 2 = 5 Ω. Resistors are used to control the size of the current. Different parts have very different resistances: a short piece of thick copper wire has a tiny one, a torch lamp has a few ohms, and a long thin wire can have many ohms. A resistor does not use up the current: the same current leaves it as enters it, but the resistance affects how large that current is.

+−ARV
Worked examples
ComponentVoltageCurrentResistance = V ÷ I
torch lamp6.0 V0.50 A12 Ω
resistor1.5 V0.30 A5 Ω
buzzer3.0 V0.10 A30 Ω
Working out resistance from two readings. The voltage is divided by the current, and the unit is the ohm.
ResistorVoltageCurrent
20 Ω6 V0.30 A
60 Ω6 V0.10 A
The same cell, different resistors. A 6 V cell is joined to a 20 Ω resistor and then to a 60 Ω resistor. The current is 6 ÷ 20 = 0.30 A and then 6 ÷ 60 = 0.10 A. Three times the resistance gives one third of the current.
PartResistance
1 m of thick copper wireabout 0.02 Ω
a small torch lampabout 5 Ω
1 m of thin nichrome wireabout 15 Ω
Sizes to remember (approximate). The wire you see in a circuit hardly resists at all. The parts that are meant to resist do.
Class activity

Straw model of resistance. With an adult. You need new plastic drinking straws, one wide and one very thin (a coffee stirrer or cocktail straw) and scissors for the adult. Do not share a straw: use your own. Blow gently through each straw onto the back of your hand and note whether the air feels strong, medium or weak. Which straw gives the weaker air flow? Then the adult cuts the wide straw to half its length: does the air feel stronger? Predict first. Record your results in a table. The straw is a model of a wire: the narrower or longer straw resists the air flow more, just as a thinner or longer wire resists the current more. What is the model not like? (Think of what flows, and of what pushes it.)

Practice
1
A voltmeter across a resistor reads 9.0 V and the ammeter reads 0.30 A. Calculate the resistance of the resistor.
+−ARV
2
Resistor X has a resistance of 20 Ω and resistor Y has 80 Ω. Each is joined in turn to the same cell. Which lets more current through, and how many times more?
3
A pupil reads 0.40 A on an ammeter before a resistor and then puts a second ammeter after it. What will the second ammeter read? Explain, and say what the resistor does do.
4
Which of these components has the greatest resistance? Calculate each resistance.
ComponentVoltage (V)Current (A)
A2.00.10
B120.50
C4.50.15