Loudness and pitch of sound; interference of sound
Week 20 · Unit 6 · 6.1–6.2 · 3 lessons
3
When sound waves meet
Workbook 9: Topics 6.1–6.2, pp. 111–119
GoalExplain how two sound waves can reinforce or cancel each other, and how noise-cancelling headphones use this.
New words
interference · what happens when two waves meet and their vibrations add togetherreinforce · to add together to make a bigger vibration and a louder soundcancel · to add together to make a smaller vibration, or none at allnoise-cancelling · using a second sound wave to cancel an unwanted sound
Explanation
When two sound waves reach the same place, the vibrations of the air particles add together. This is interference. If a peak of one wave meets a peak of the other, the vibrations add up and the waves reinforce. Two identical waves in step give a wave of the same frequency but twice the amplitude, so the sound is louder with the same pitch. If a peak of one meets a trough of the other, and the two waves have the same amplitude and frequency, they cancel, and there is little or no sound. With two loudspeakers playing the same steady note, a listener who walks in front hears loud and quiet places in turn, because the waves reinforce in some places and cancel in others. Noise-cancelling headphones listen to a steady noise, such as an engine hum, and make a sound wave of the same frequency and amplitude whose peaks arrive where the hum has troughs, so most of the noise is cancelled.
Waves meet with…
Amplitudes add up to…
Sound
peak on peak
bigger
louder
trough on trough
bigger
louder
peak on trough, equal amplitude
almost none
very quiet or silent
peak on trough, unequal amplitude
smaller
quieter
Worked examples
Reinforcing. Each of two identical waves has an amplitude of 1 mm, shown by the solid line. The dashed line is their sum, with an amplitude of 2 mm. The frequency is unchanged.
Cancelling. The solid wave and the dashed wave have the same amplitude and frequency, but every peak of one meets a trough of the other. Their sum is a flat line at zero: silence.
a tiny microphone picks up the engine hum→electronics make a wave of the same size with peaks and troughs swapped→the headphone speaker plays that wave as well→hum and copy cancel: the wearer hears much less
Noise-cancelling headphones work best on steady noises, such as an engine hum, because the matching wave is easy to make. They are poor at sudden sounds, such as a shout, that change too quickly to copy. The method needs the matching wave to be nearly exactly opposite, or only part of the noise is cancelled.
Class activity
The tracing-paper model. Draw a smooth wave on graph paper: peaks 2 cm above a middle line and 2 cm below, with a peak every 8 cm along 24 cm. Copy it exactly on tracing paper. Put the copy on top of the first wave so that the peaks match. At each 2 cm mark, add the two heights (up is positive, down is negative) and draw a point in colour. Join the points: what do you see? Now slide the copy 4 cm (half a wave) along, so that peaks lie on troughs, and add the heights again. Then try 2 cm. Which positions reinforce, cancel or give something in between? The paper wave stands for the vibrations of air particles, but the real sound is not a picture: it is particles moving back and forth along the direction of travel. Where does your model break down?
Practice
1
Two sound waves of the same frequency, 300 Hz, meet. Wave 1 has an amplitude of 0.2 mm and wave 2 has 0.1 mm. What are the amplitude and frequency of the combined wave if (a) peaks meet peaks, (b) peaks meet troughs?
Meeting
Amplitude (mm)
Frequency (Hz)
wave 1 alone
0.2
300
wave 2 alone
0.1
300
(a) peaks meet peaks
?
?
(b) peaks meet troughs
?
?
(a) Amplitude 0.3 mm, frequency 300 Hz. (b) Amplitude 0.1 mm (0.2 − 0.1), frequency 300 Hz.
2
A technician wants headphones to cancel a steady hum of 120 Hz. Describe the sound wave that the headphones should add.
It should have a frequency of 120 Hz and the same amplitude as the hum, with its peaks arriving where the hum has troughs.
3
Mina walks in a straight line past two loudspeakers that play the same steady note. She hears loud, quiet, loud, quiet places. Explain. What would she hear if one speaker were switched off?
Where the waves meet peak on peak she hears loud sounds (reinforcement); where they meet peak on trough she hears quiet places (cancellation). With one speaker only, there is nothing to interfere with, so the loudness changes only slowly with distance.
4
Complete the table: what happens when the waves meet in each case?
Wave A at the point
Wave B at the point
Result
1
peak
peak
?
2
peak
trough
?
3
trough
trough
?
4
trough
peak
?
1: reinforce, louder. 2: cancel, almost silent. 3: reinforce, louder. 4: cancel, almost silent.