Loudness and pitch of sound; interference of sound
Week 20 · Unit 6 · 6.1–6.2 · 3 lessons
2
High notes and low notes
Workbook 9: Topics 6.1–6.2, pp. 111–119
GoalLink frequency to pitch, calculate frequency in hertz, and tell pitch apart from loudness.
New words
frequency · the number of complete vibrations in one secondhertz (Hz) · the unit of frequency; 1 Hz is one vibration per secondpitch · how high or low a note sounds; it depends on frequencyultrasound · sound with a frequency too high for people to hear
Explanation
The frequency of a sound is how many complete vibrations are made in one second. It is measured in hertz (Hz). A string that vibrates 440 times each second has a frequency of 440 Hz. We can find it from frequency = number of vibrations ÷ time in seconds. For example, 1200 vibrations in 4 s is 1200 ÷ 4 = 300 Hz. A higher frequency makes a higher pitch. On an oscilloscope, count the complete waves and divide by the time they take. More waves in the same time means a higher frequency. Pitch depends on frequency, not on amplitude: plucking a string harder makes the sound louder, not higher. Shorter, thinner or tighter strings vibrate faster and give higher notes. Young people can hear from about 20 Hz to about 20 000 Hz; sounds above that are ultrasound.
Change to the string
Vibrations per second
Pitch
shorter
more
higher
tighter
more
higher
thicker
fewer
lower
plucked harder
no change
no change (but louder)
Worked examples
Vibrations
Time (s)
Frequency (Hz)
600
2
300
1500
3
500
1760
4
440
Working out frequency from the number of vibrations and the time.
Two traces on the same scale. The solid trace has 5 complete waves in 10 ms (0.010 s), so its frequency is 5 ÷ 0.010 = 500 Hz. The dashed trace has twice as many waves, so its frequency is 1000 Hz. Its pitch is higher, but the peaks are the same height, so the loudness is the same.
Note
Frequency (Hz)
Amplitude (mm)
Description
1
300
0.2
low and quiet
2
900
0.2
high and quiet
3
300
0.6
low and loud
Telling frequency and amplitude apart in the data for three notes played on an instrument.
Class activity
The ruler twang. With an adult, on a table. Press a 30 cm plastic or wooden ruler firmly on the table edge with one hand, so that 25 cm stick out. Flick the free end down a small, fixed distance (about 1 cm) and release it. Watch it and listen from arm’s length. Repeat with 20 cm, 15 cm, 10 cm and 5 cm sticking out, always flicking the same distance. Record what you see and hear in a table: slow flutter, buzz or a clear note. As the overhang gets shorter, does the ruler vibrate faster or slower? Which sounds have the higher pitch? You change only the length; the ruler and the flick stay the same. When the ruler moves fewer than about twenty times a second you see it but do not hear a note, as it is below the lowest frequency people hear. Do not flick the ruler toward anyone.
Practice
1
A string vibrates 750 times in 3 s. What is its frequency?
Vibrations
Time (s)
Frequency
750
3
?
750 ÷ 3 = 250 Hz.
2
Compare notes A, B and C: say which has the highest pitch, which is loudest, and which two have the same pitch.
Note
Frequency (Hz)
Amplitude (mm)
A
400
0.1
B
800
0.1
C
400
0.3
B has the highest pitch (800 Hz). C is the loudest (largest amplitude). A and C have the same pitch (400 Hz).
3
A harp has some long strings and some short strings of the same kind under the same tension. Which gives the higher note, and why?
The short strings give the higher notes, because a shorter string vibrates faster, so its frequency is higher.
4
Find the frequency of the sound in the trace. Count the complete waves and use the time scale.
There are 5 complete waves in 5 ms (0.005 s), so the frequency is 5 ÷ 0.005 = 1000 Hz.