Parallel circuits; current and voltage in parallel circuits
Week 33 · Unit 9 · 9.1–9.2 · 3 lessons
2
The same voltage on every branch
Workbook 9: Topics 9.1–9.2, pp. 172–179
GoalSay what voltage shows, measure it with a voltmeter, and use the rule that every branch of a parallel circuit has the voltage of the cell.
New words
voltage · a measure of the energy that a cell or battery gives to the current; its unit is the volt (V)voltmeter · a meter that measures voltage; it is connected across a component, in parallel with itsupply voltage · the voltage of the cell or battery that drives the circuitbattery · two or more cells joined together
Explanation
The voltage of a cell shows how much energy it can give to the current: a 4.5 V battery gives more energy than a 1.5 V cell. It is measured in volts (V) with a voltmeter. A voltmeter is connected across the component you are testing, in parallel with it, whereas an ammeter goes in series. In a series circuit the supply voltage is shared between the components, and the voltages across them add up to the supply voltage. Two identical lamps on a 6 V supply have 3 V each. In a parallel circuit every branch is joined straight across the cell, so the voltage across each branch equals the supply voltage, however many branches there are. Three lamps in parallel on a 6 V cell each have 6 V. We treat the cell as ideal, which means its voltage does not change; a real cell’s voltage falls a little when it supplies a large current.
Series circuit
Parallel circuit
paths for the current
one
two or more
current
the same everywhere
splits between the branches
voltage
shared between the components
the same across every branch
one component breaks
everything stops
the other branches keep working
Worked examples
A voltmeter across one lamp. A 6.0 V supply drives two identical lamps in series. The voltmeter is across L₁, so it reads 6.0 ÷ 2 = 3.0 V. A voltmeter across both lamps together would read 6.0 V.
Across the…
Voltage
battery
4.5 V
lamp
4.5 V
motor
4.5 V
buzzer
4.5 V
Three components in parallel on a 4.5 V battery. Each branch is joined directly across the battery, so each has 4.5 V.
Part
Voltage across it
Current through it
lamp
6 V
0.50 A
motor
6 V
1.50 A
battery
6 V
2.00 A
The same voltage, but not the same current. A 6 V battery supplies a lamp and a motor in parallel. Both have 6 V across them, but the motor takes more current. The currents in the branches add up to the current from the battery.
Class activity
Reading voltages. With an adult. (1) Look at the labels of cells and batteries from a drawer (do not open them, and leave out button cells). Copy the voltage printed on each. Which sizes of cell have the same voltage? (2) If an adult has a multimeter, they set it to DC volts (never to the current range) and read a new AA cell: about 1.5 V. Then two AA cells joined end to end in a holder: about 3 V. The adult then holds the probes across each of two identical bulbs joined in parallel to one cell: both readings are about the same as the cell, and slightly lower if the cell is worn. (3) Predict what the meter would read across one bulb if the two bulbs were in series with the two cells. Record all readings in a table. If there is no multimeter, answer step (3) on paper and check it against the lesson.
Practice
1
A 3 V battery is joined to a motor and a buzzer in parallel. State the voltage across the motor, across the buzzer and across the battery.
3 V across each of them: in a parallel circuit every branch has the supply voltage.
2
Two identical lamps are in series with a 3.0 V supply. A voltmeter is joined across L₂. What does it read? What would it read if there were three identical lamps in series?
3.0 ÷ 2 = 1.5 V with two lamps. With three identical lamps it would read 3.0 ÷ 3 = 1.0 V.
3
Ali wants the current through lamp L₂ and the voltage across L₂ at the same time in the circuit shown. Say where the ammeter and the voltmeter must be connected, using the words ‘in series’ and ‘across’.
The ammeter goes in the L₂ branch, in series with L₂. The voltmeter is connected across L₂, in parallel with it.
4
A pupil measures the voltages in a parallel circuit on a 4.5 V cell: lamp 4.5 V, buzzer 4.5 V, motor 3.8 V. Which reading is surprising, and what might have gone wrong?
The motor reading. In a parallel circuit it should also be 4.5 V. Possible causes: the motor is not directly across the cell (a loose wire or a part in series with it), or the voltmeter was not joined across the motor.