GoalWrite word equations for acid + metal oxide and acid + metal carbonate, and describe the steps for making crystals of a salt.
New words
carbonate · a compound containing carbon and oxygen with a metal, such as calcium carbonate in limestone and eggshellexcess · more than is needed to react with everything elsefiltrate · the liquid that passes through the filter papercrystallise · to form crystals as water leaves a salt solution
Explanation
Copper does not react with dilute acid, but its oxide and its carbonate do. So there are two more ways to make salts: acid + metal oxide → salt + water, and acid + metal carbonate → salt + water + carbon dioxide. With a carbonate, the mixture fizzes as carbon dioxide leaves. A teacher can show that the gas is carbon dioxide because it turns limewater milky. To get a pure salt, the teacher warms the acid gently (it must not boil, or it spits) and adds the solid a little at a time until some is left at the bottom. That is excess solid, which shows that all the acid has been used up. The mixture is filtered, and the filtrate is a solution of the salt. The teacher then heats it to evaporate part of the water, leaves it to cool, and crystals form. Learners watch from a distance or study pictures.
warm the acid gently (never boil)→add the solid a little at a time until some is left over→filter off the excess solid→heat the filtrate to evaporate part of the water→leave to cool so that crystals form→dry the crystals between paper
Worked examples
Reactants
Products
zinc oxide + sulfuric acid
zinc sulfate + water
magnesium carbonate + nitric acid
magnesium nitrate + water + carbon dioxide
calcium carbonate + hydrochloric acid
calcium chloride + water + carbon dioxide
Three word equations. In each, the metal part of the solid joins the acid part of the acid.
What the teacher does
What is in the solution
Crystals
stops adding the solid too soon
salt + some acid left
impure
adds a little more than needed, then filters
salt only
pure
Why add the solid in excess? If the teacher stops too soon, some acid is left in the solution and the crystals would be impure. With excess solid, every bit of acid has reacted, and the solid that remains is simply filtered off.
calcium carbonate in the statue→reacts with acid in the rain→calcium salt + water + carbon dioxide→the surface slowly wears away
Chemistry in nature: limestone and marble are mostly calcium carbonate. Rain that is slightly acidic reacts with them slowly, which is why old statues lose their detail.
Class activity
The fizz test with kitchen things. With an adult. Put 30 mL of white vinegar (it contains a mild acid) into each of five small cups. Choose five test materials: crushed eggshell, a crushed seashell, sand, table salt and sugar. Predict which will fizz. Add one level teaspoon of each material to its own cup, keep your face back and watch for bubbles. Record none, a few or many. Keep the vinegar volume, the amount of solid and the temperature the same, so that only the material changes. The material that fizzes most probably contains a carbonate. What do the sand, salt and sugar cups show? These bubbles are probably carbon dioxide, but the test alone does not prove it. What would a teacher do to check? Do not taste anything and wash your hands afterwards.
A teacher makes a salt from an insoluble solid and an acid. Why is the solid added in excess, and why is the mixture not boiled?
The excess solid makes sure that all of the acid has reacted, so the salt is pure. The leftover solid is filtered off. Boiling would make the mixture spit out and could be dangerous.
3
Magnesium carbonate is added to sulfuric acid and the mixture fizzes. Name the gas, the salt and the other product, and write the word equation.
The gas is carbon dioxide, the salt is magnesium sulfate and the other product is water. Magnesium carbonate + sulfuric acid → magnesium sulfate + water + carbon dioxide.
4
The steps for making magnesium nitrate crystals from magnesium oxide have been jumbled. Put them in the right order.
Letter
Step
A
filter off the unreacted magnesium oxide
B
add magnesium oxide a little at a time to warm nitric acid
C
leave the solution to cool so that crystals form
D
heat the filtrate to evaporate part of the water
B, A, D, C. Add the magnesium oxide to the warm acid, filter off the excess, heat the filtrate to evaporate some of the water, then leave to cool.