Using the reactivity series and displacement reactions
Week 17 · Unit 5 · 5.2 · 3 lessons
3
From ore to metal
Workbook 9: Topic 5.2, pp. 91–93
GoalUse the position of carbon in the reactivity series to explain how metals are extracted from their ores.
New words
ore · a rock that contains enough of a metal compound to be worth extractingextraction · getting a metal out of its compoundblast furnace · a tall furnace in which iron oxide is heated with carbon and hot air to make ironnative metal · a metal found in the ground as the metal itself, not in a compound
Explanation
Most metals are found in rocks as compounds, often oxides. To get the metal, we must take the oxygen away, and that is a displacement reaction. Carbon is cheap and it is placed in the series between aluminium and zinc. So carbon can displace any metal below it, such as zinc, iron and copper. In a blast furnace, iron ore (iron oxide) is heated with coke, which is nearly pure carbon, and hot air. The change can be summed up as iron oxide + carbon → iron + carbon dioxide. Metals above carbon, such as aluminium and magnesium, hold on to their oxygen too strongly, so they are extracted using electricity, which costs much more. Gold is so unreactive that it is often found as a native metal. This is one reason why copper and iron were in use long before aluminium.
Order
Substance
most reactive
potassium
sodium
lithium
calcium
magnesium
aluminium
carbon (not a metal)
zinc
iron
copper
silver
least reactive
gold
Worked examples
iron ore (iron oxide), coke (carbon) and hot air go in→carbon takes the oxygen from the iron oxide→gas (carbon dioxide) leaves at the top→molten iron collects and is tapped off at the bottom
Inside a blast furnace. Iron ore, coke and hot air go in at the top and bottom. Carbon takes the oxygen from the iron oxide, and molten iron runs out at the bottom.
Metal
Compared with carbon
Usual method
zinc
below
heat the oxide with carbon
magnesium
above
use electricity
copper
below
heat the oxide with carbon
gold
far below
often found as the metal itself
Predicting the method from the series. A metal below carbon can be extracted by heating its oxide with carbon. A metal above carbon needs electricity.
Oxide heated with carbon
Result
W oxide
metal formed
X oxide
no change
Y oxide
metal formed
Z oxide
no change
The place of carbon in the series is itself found from experiments. Carbon was heated with the oxides of four unknown metals W, X, Y and Z. A metal formed only with the oxides of W and Y. So W and Y are below carbon and X and Z are above carbon.
Class activity
Choose the method cards. Write the metals sodium, aluminium, zinc, iron, copper and gold on six cards. Lay the series on the table in order, with a card marked ‘carbon’ in its place between aluminium and zinc. Sort the six metal cards into two piles: ‘extracted by carbon’ (below the carbon card) and ‘needs electricity’ (above it). Put a star on the cards for metals that are sometimes found as the native metal. An adult then names a mystery metal; slide it into your piles and say the method. Check that your piles agree with the series. Why does a star not mean the same as ‘below carbon’? (Think: all the starred metals are below carbon, but not every metal below carbon is found native.)
Practice
1
Carbon was heated with the oxides of zinc, magnesium, iron and aluminium. In which tubes would you expect metal to form?
Oxide heated with carbon
Metal formed?
zinc oxide
?
magnesium oxide
?
iron oxide
?
aluminium oxide
?
Zinc oxide and iron oxide. Zinc and iron are below carbon, so carbon displaces them. Magnesium and aluminium are above carbon, so there is no change.
2
Why is aluminium not made by heating its ore with carbon, as iron is?
Aluminium is above carbon in the series, so carbon cannot displace it from its oxide. Electricity has to be used, which is more expensive.
3
Write word equations, or ‘no reaction’, for: (a) carbon heated with zinc oxide; (b) carbon heated with magnesium oxide.
(a) carbon + zinc oxide → zinc + carbon dioxide. (b) no reaction, since magnesium is above carbon.
4
Copper and iron objects were made thousands of years before aluminium was first produced in quantity. Use the series to suggest why.
Metal
Position compared with carbon
Method needed
copper
below
carbon and heat
iron
below
carbon and heat
aluminium
above
?
Copper and iron are below carbon, so they can be extracted by heating their ores with carbon, which was possible with simple furnaces. Aluminium is above carbon and needs electricity, which people did not have for most of history.