GoalPlan an investigation of the current in the coil, predict the result, and write a conclusion that matches the evidence.
New words
prediction · a statement of what you expect to find, with a reasonammeter · a meter that measures currentconclusion · a statement of what the results showevaluate · to judge how good a method or result is and suggest improvements
Explanation
To investigate the current, change the number of cells in the circuit (one, two and three) and measure the current with an ammeter. Keep the coil, the core, the size of the clips and the time with the switch closed the same. The dependent variable is the number of clips held. A good prediction gives a reason: the more current, the stronger the electromagnet, so more clips are held. A sketch graph starting at zero rises as the current goes up. Changing the current needs several cells and an ammeter, so it is done in a school laboratory with a teacher, who checks that the wire does not get hot. At home we study the data. In the conclusion, say what the data show, quote values, say whether the prediction matched and mention limits, such as one nail and one coil. Then evaluate: could the method be improved with more repeats?
Worked examples
Current (A)
Clips held
0.2
2
0.4
4
0.6
7
0.8
9
1.0
10
A school laboratory data set (teacher-led). The current is changed by adding cells and is measured in amperes (A). The clips held are counted.
Comparing the prediction with the data. The clips rise as the current rises, as predicted. From 0.2 A to 1.0 A the clips go from 2 to 10, so the current is five times bigger and the clips five times as many. Between 0.8 A and 1.0 A the rise is smaller, which may be a limit of the nail or a counting error, and it is worth repeating.
Conclusion
Comment
The bigger the current, the more clips were held, from 2 clips at 0.2 A to 10 at 1.0 A.
uses the evidence and quotes values
Electricity always makes magnets better.
goes beyond the evidence
Writing a good conclusion and a poor one.
Class activity
Plan a fair test on paper. Choose the factor to investigate: the number of turns, the type of core, or the current (the last is for a teacher to carry out). Write down the independent variable, the dependent variable and at least four control variables. Draw the results table with space for repeats and the mean, make a prediction with a reason, and sketch the graph you expect. Say which kind of graph you will use and why. Then ask an adult to do the safe parts with you using one cell only: switch on for a few seconds, and stop if the wire becomes warm.
Practice
1
Write a prediction with a reason for an investigation of how current in the coil changes the number of clips held.
The more current, the more clips held, because a larger current makes a stronger magnetic field in the coil.
2
List four variables to keep the same when the current is changed.
The number of turns, the core, the size of the clips and the time the switch is closed (or the same nail and coil).
3
A current of 0.5 A holds 5 clips and 1.0 A holds 10 clips. A learner writes ‘the current doubles and the clips double’. Is this supported by the data?
Current (A)
Clips
0.5
5
1.0
10
Yes for these two readings, but only two readings are not enough to say it is always true.
4
Kira tested 1, 2 and 3 cells once each and found 4, 9 and 13 clips. Give two ways to improve her investigation.
Cells
Clips
1
4
2
9
3
13
Repeat each test and find the mean; test more values of current (and measure it with an ammeter); use smaller clips for finer steps.