AdvertisementYour brand could be hereYour brand hereOn every Darslab page · students, parents and teachersinfo@darslab.comAsk for pricesPricesinfo@darslab.com
☰ Year plan · Science

Investigating electromagnets

Week 35 · Unit 9 · 9.4 · 3 lessons
1

Three ways to power up

Learner’s Book 8: Topic 9.4, pp. 311–320
GoalName the three factors that change the strength of an electromagnet and say how each one changes it.
New words
factor · something that can change the result of an experimentsoft iron · iron that becomes a magnet easily and stops being one just as easilydemagnetised · has lost its magnetismstrength · how big a force the magnet can exert
Explanation

An electromagnet has a coil, a core and a current. Each of these is a factor that changes how strong it is. More turns in the coil make it stronger, because each turn adds to the field. A larger current makes it stronger, and more cells in the circuit give a larger current. An iron or steel core gives a strong electromagnet, but cores of wood, plastic, rubber, aluminium or copper add almost nothing, because they are not magnetic. Soft iron is best: it is magnetised easily and loses its magnetism easily when the current is switched off, whereas steel keeps some. We can measure the strength by the force the magnet exerts, for instance the number of paperclips it holds. Changing the current is a job for a school laboratory with a teacher; at home use one cell only.

Worked examples
iron nailcoil of wirecellswitchpaper clips
More turns. This electromagnet has 12 turns and holds 4 clips with one cell. With the same nail and cell but only 6 turns it would hold fewer clips.
02468iron nailsteel screwwooden chopstickglass rodcopper rodclipsclips held
Different cores, the same coil and cell. The number of clips shows which cores are magnetic. Wood, glass and copper hold none.
CoreClips with the current onClips after switching off
soft iron90
steel62
Soft iron and steel. After the switch is opened the soft iron core lets go of all its clips, but the steel core is still holding some.
Class activity

Test one factor with an adult, using one small cell only. Make the electromagnet from the last topic (insulated wire, a switch, one cell). Wind 20 turns round a large iron nail, switch on for a few seconds and count the small steel paperclips the point picks up. Open the switch. Now keep the 20 turns and the cell the same and change only the core: an iron nail, a steel bolt of the same width, a wooden chopstick and an aluminium knitting needle. Move the wire carefully from one core to the next. Predict first, record each core in a table and do two runs. Touch the wire briefly: if it feels warm, switch off and tell an adult. Never add more cells at home.

Practice
1
Tom’s electromagnet is too weak to lift a heavy bolt. Give three different changes that could make it stronger.
2
Three rods of the same size are used as cores in turn, with the same coil and cell. Rod P holds 9 clips, rod Q holds none and rod R holds 4. Which rod could be soft iron, which plastic and which steel? Explain.
0246810rod Prod Qrod Rclipsclips held
3
Mia adds a second cell to the circuit. Predict what happens to the number of paperclips and why.
4
This electromagnet has 10 turns and two cells. Give two ways to make it stronger without changing the core.
iron nailcoil of wirecellsswitchpaper clips