AdvertisementYour brand could be hereYour brand hereOn every Darslab page · students, parents and teachersinfo@darslab.comAsk for pricesPricesinfo@darslab.com
☰ Year plan · Science

Electromagnets

Week 34 · Unit 9 · 9.3 · 3 lessons
3

Magnets with a switch

Learner’s Book 8: Topic 9.3, pp. 305–310
GoalGive uses of electromagnets and say why a magnet that cannot be switched off would not do.
New words
application · a practical usenon-magnetic metal · a metal not attracted by magnets, such as copper or aluminiumelectric bell · a bell struck by a hammer that an electromagnet pullselectric motor · a machine that uses electromagnets to turn electrical energy into movement
Explanation

Electromagnets are used wherever a magnet has to be switched on and off or changed in strength. A crane in a steel workshop can carry a big electromagnet. It lifts heavy sheets of steel and, when the current is switched off, lets them drop on to a stack. A permanent magnet would never let go. A recycling plant uses an electromagnet over a belt to lift steel cans from mixed waste, leaving aluminium, plastic and glass behind. In an electric bell, a coil with an iron core pulls a springy metal arm that carries a hammer. The hammer strikes the bell, but the moving arm also breaks the circuit, so the pull stops and the spring flicks the arm back. That closes the circuit again, and the cycle repeats many times a second while the button is pressed. An electromagnet can also hold a shop’s security door shut and let go when the power is switched off. Electric motors use electromagnets to turn electrical energy into movement.

electric belldoor lockrecycling plant
Worked examples
ItemAttracted?Where it ends up
steel canyeslifted into the steel bin
aluminium cannostays on the belt
glass jarnostays on the belt
iron nailyeslifted into the steel bin
Sorting on a conveyor. An electromagnet over a belt removes only magnetic items.
The electric bell repeats one cycle very fast, which is why it rings and does not just click once.
Permanent magnetElectromagnet
lets go when power is offnoyes
can be turned off to releasenoyes
A door held by an electromagnet at a shop. Power on: the door is held. Power off: the door can open. A permanent magnet is the wrong choice because there would be no way to let go quickly.
Class activity

Mini recycling sorter, with an adult. Tip a small mix of steel paperclips, aluminium foil balls, plastic buttons and wooden pegs on a tray. Use the electromagnet from the last lesson (one cell only, switch on for a few seconds at a time, wire may get warm). Pass its point over the mixture and record in a table what is lifted. Switch off over a second tray and check that the items fall. Try a fridge magnet in the same way. Which one lets go more easily? Draw a diagram of your sorter with labels.

Practice
1
Choose electromagnet or permanent magnet for each job: (a) holding a note on a fridge, (b) lifting steel sheets on a crane and then dropping them, (c) keeping a cupboard door closed, (d) ringing a bell.
2
A workshop wants a holder that grips a steel plate firmly while it is drilled and then lets go at once. Which kind of magnet is needed, and why?
3
Why does an electric bell keep ringing while the button is held down, and not make just one sound?
4
An electromagnet is passed over the four items. Which will it lift?
A?B?C?D?