AdvertisementYour brand could be hereYour brand hereOn every Darslab page · students, parents and teachersinfo@darslab.comAsk for pricesPricesinfo@darslab.com
☰ Year plan · Science

Turning forces

Week 8 · Unit 3 · 3.4 · 3 lessons
3

Keeping it balanced

Learner’s Book 8: Topic 3.4, pp. 85–92
GoalUse moments to balance levers and plan, record and explain an investigation of force and distance from the pivot.
New words
balanced · the moments on the two sides of the pivot are equal and oppositeclockwise · the direction that clock hands turnanticlockwise · the opposite direction to clock handsvariable · something that can change in an investigation
Explanation

A lever is balanced when the moment turning one way equals the moment turning the other way. On a seesaw, one moment tries to turn it clockwise and the other anticlockwise. If Aisha weighs 500 N and sits 1.6 m from the pivot, her moment is 800 N m. Leo, weighing 400 N, balances her by sitting 2 m away: 400 × 2 = 800 N m. A heavier person must sit closer. In an investigation you can keep the moment the same and find what happens to the force as the distance changes: the closer to the pivot, the bigger the force needed, so halving the distance doubles the force. Predict first, change one variable, keep the others the same, repeat and decide whether any result needs repeating.

500 N400 N1.6 m2 mpivot
Worked examples
350 N500 N2 m1.4 mpivot
Dina (350 N) sits 2 m from the pivot and Omar (500 N) sits 1.4 m away on the other side. Moments: 350 × 2 = 700 N m and 500 × 1.4 = 700 N m. They are equal, so the seesaw balances.
300 N200 N2 m3 mpivot
To balance, the unknown can be found by dividing. Tom (300 N) sits 2 m from the pivot. His sister weighs 200 N. Her distance = 600 ÷ 200 = 3 m.
Distance from pivot (m)Force needed (N)
0.62
0.43
0.34
0.26
Keeping a moment of 1.2 N m, the force needed to give it goes up as the distance gets smaller.
Class activity

Balance a ruler with an adult. Rest a 30 cm ruler across a pencil lying flat on the table (the pencil is the pivot; a small ball of modelling clay on each side stops it rolling) so that the 15 cm mark is on the pencil. Put two coins on the ruler at the 5 cm mark (10 cm from the pivot). Predict where one coin, then three coins, must go on the other side to balance. Test it by sliding the coins until the ruler is level. Record your results in a table: number of coins and distance on each side. Calculate (coins × distance) for each side. Do the sides match? Keep the coins the same and keep the table flat. Repeat each to check.

Practice
1
A seesaw has a 240 N child 3 m from the pivot on the left. What weight must be placed 1.5 m from the pivot on the right to balance it?
240 N?3 m1.5 mpivot
2
A 250 N child sits 2 m from the pivot of a seesaw that is held level. Another child of 400 N sits 1 m from the pivot on the other side. Work out both moments and say which side goes down when it is let go.
250 N400 N2 m1 mpivot
3
On a ruler, 2 coins are placed 12 cm from the pivot. At what distance on the other side must 3 identical coins go to balance?
4
A tight nut needs a moment of 20 N m. Explain why a spanner with a long handle makes the job easier.