GoalInvestigate balanced and unbalanced forces with friction, forcemeters and force diagrams.
New words
newton (N) · the unit of forceforcemeter · an instrument with a spring that measures force in newtonsfriction · a force that acts against the sliding of two surfacesvariable · something that can change in an investigation
Explanation
We measure forces with a forcemeter. The scale is in newtons, N. Pull a box across a table with a forcemeter. When you pull gently, the box does not move: your pull is balanced by friction. Friction matches your pull only up to a limit. When you pull harder than that limit, the pull is bigger than the friction, the forces are unbalanced and the box speeds up. If you pull with a force equal to the friction, the box moves at a steady speed. The friction is larger on a rough surface such as carpet and smaller on a smooth surface. In a fair test you change one variable, such as the surface, and keep the others, such as the box and the load, the same. You can show your results in a table and a bar chart. Models and pictures help you think about forces, but you should always say where they differ from the real thing.
Worked examples
Surface
Force to keep the box moving (N)
smooth tile
2
wood
3
carpet
5
rubber mat
7
Mia pulls a shoebox over four surfaces and reads the forcemeter when the box moves at a steady speed. The force she reads equals the friction, because the forces are balanced.
Pull (N)
What the box does
Friction (N)
2
stays still
2
4
stays still
4
6
starts to slide
about 6 (the limit)
Ana pulls a heavy box with a forcemeter and slowly pulls harder. Nothing moves until the pull reaches 6 N, and then the box starts to slide. So friction can grow to match the pull, but only up to a limit. That limit is about 6 N here.
Ravi drags a crate with a pull of 30 N to the right while the friction on the crate is 20 N to the left. The forces are not equal, so there is an unbalanced force of 10 N to the right and the crate speeds up.
Class activity
Friction investigation (an adult helps). Make a forcemeter from a wide rubber band and a ruler if you do not have one: hook the band on the box and measure how much it stretches (in mm) as you pull the box at a steady speed. Pull a shoebox with a few coins inside along four surfaces (tile, wood, carpet, a towel). Predict first. Repeat each surface three times and find the mean. What are you changing? What are you measuring? What do you keep the same? Make a table and bar chart and write a conclusion. Say which results were hard to judge. Safety: keep fingers out of the way of the band, do not let it snap back at anyone’s face.
Practice
1
Which variable is the independent variable and which is the dependent variable in the friction investigation? Name two control variables.
Independent: the surface. Dependent: the force (stretch) needed to keep the box moving. Controls: the box, the mass of coins, the speed, the same band.
2
A forcemeter shows 5 N when the box is pulled at a steady speed. What is the friction on the box? Explain.
5 N. The forces are balanced, so the friction is equal to the pull.
3
Pulling with 8 N on a box that has 5 N of friction, what happens to the box? Draw a force diagram.
The box speeds up. The unbalanced force is 8 − 5 = 3 N in the direction of the pull.
4
A box has 5 N of friction at most. A child pulls it with 3 N and it does not move. How big is the friction at that moment, and why? What happens if she pulls with 7 N?
The friction is 3 N, because the forces are balanced and the box is not moving. With 7 N the pull is bigger than the greatest friction of 5 N, so the box speeds up with an unbalanced force of 2 N.