GoalCompare pressure in liquids and gases, predict changes with particles, and analyse results from pressure investigations.
New words
prediction · a statement of what you think will happen, with a reasontrend · the general pattern in resultscontrol variable · something kept the same to make a test fairevaluate · to judge how good a method or result is
Explanation
Liquid pressure and gas pressure are both caused by particles pushing, but in different ways. In a liquid, pressure grows with the depth because of the weight of the liquid above. In a gas in a closed container, pressure grows with the number of particles, with a smaller volume and with a higher temperature, because there are more or harder collisions. In the atmosphere, the pressure falls with altitude. Both ideas can be tested. In a jet-of-water test, the depth of water above the hole is the independent variable and the distance the jet reaches is the dependent variable. Control the size of the hole and the bottle. Use a table and a line graph, say what the trend is, and then explain it using particles. When you predict, give a reason. When you evaluate, say how to make the test more accurate.
Worked examples
Depth above the hole (cm)
Try 1 (cm)
Try 2 (cm)
Try 3 (cm)
Mean (cm)
5
5
5
5
5
10
9
8
10
9
15
12
13
11
12
20
14
15
13
14
Kenji’s results for a jet from a bottle: the lower the water level falls, the shorter the jet. Each mean is from three tries.
more depth of water→more weight above the hole→greater pressure→jet goes further
He explains the trend. Deeper water has more weight above the hole, so the pressure at the hole is greater and the water is pushed out harder and further.
Prediction for the gas test: if the balloon on the bottle is put in warm water, the air particles move faster, hit the walls harder and the balloon inflates a little.
Class activity
Design your own test with an adult. Choose one question: how does the depth of water change the pressure at a hole, or how does the temperature of air in a bottle change a balloon on its neck? Write your question, a prediction with a reason, and a list of the independent, dependent and control variables. Do it with the adult, repeat each measurement three times, record a table, draw a graph, describe the trend and explain it with particles. Write two ways you could improve accuracy. Take care with water on the floor.
Practice
1
A student’s jet results are in the table. What is the trend, and about how far would the jet reach at a depth of 10 cm?
Depth (cm)
Distance (cm)
4
4
8
7
10
?
12
9
16
11
The deeper the water above the hole, the further the jet reaches. At 10 cm the jet reaches about 8 cm (between 7 cm and 9 cm).
2
A stretchy weather balloon filled with gas rises high into the sky. Predict what happens to its size, and explain.
It gets bigger. The air pressure outside falls as the balloon rises, but the gas inside still pushes out, so the balloon swells.
3
Give one similarity and one difference between how pressure arises in a liquid and in a gas.
Similarity: both come from particles pushing on surfaces. Difference: in a liquid the pressure increases with depth because of the weight above, but in a gas in a container it comes from the particles’ collisions with the walls.
4
Name two variables you should control in the water jet test.
The size of the hole, the same bottle, the same liquid, the same height of the bottle above the floor.