Light in glass
A fibre optic cable is made of many thin strips of glass. The data is sent as flashes of light that travel down the glass. Fibre optic cables are very fast, and they can reach 10 Gbps or more. One Gbps is 1,000 Mbps, so 10 Gbps is far faster than 300 Mbps. Electromagnetic interference does not affect light, so the data stays clean. The cables can also be thinner, because they do not need a thick case against interference. They are harder and more expensive to install, and old copper cables are already in place in many countries. So fibre is mostly used for long distances, such as between towns, under the ground.
| Copper cable | Fibre optic cable | |
|---|---|---|
| Carries data as | electrical signals | light |
| Made of | thin strips of copper | thin strips of glass |
| Speed | up to about 300 Mbps | 10 Gbps or more |
| Interference | can suffer from it | not affected |
1size = 1200 2speed = int(input("Speed in Mbps? ")) 3print("Seconds:", size / speed)
Seconds: 0.12
Light-signal game (needs a torch and an adult; do it in a dim room). Choose a short word, such as “GO”. Agree a code: one short flash means 1, one long flash means 0, and write the code for each letter with 3 flashes only (for example G = 1 1 0, O = 0 1 1). Flash the code to a partner across the room, who writes down what they see. Can they read it? Now put a sheet of paper in the way as “interference”. Never point a torch at anyone’s eyes. Discuss why light signals in glass are not affected by electricity.
| Cable | Carries data as |
|---|---|
| copper | ? |
| fibre optic | ? |
1size = 1800 2speed = int(input("Speed in Mbps? ")) 3print("Seconds:", size / speed)