GoalPlan and use a circuit to test whether materials conduct, record the results and explain surprising ones.
New words
test circuit · a circuit with a gap that a material is put intopattern · something that happens again and again in the resultsprediction · what you think will happen, with a reasoncoating · a thin layer on the surface of something
Explanation
To test a material, put it in the gap of a circuit made from a small cell, a bulb and wires with clips. A lit bulb means a conductor and a dark bulb means an insulator. Before you test anything, join the two clips together. The bulb should light, which shows that the circuit works. Write each result in a table and look for a pattern. Metals conduct and most non-metals do not. A metal object can fool you if it is covered by paint, plastic or rust, because that coating is an insulator. Scraping the coating off, or touching the clips to bare metal, shows that the metal does conduct.
Worked examples
Before testing anything, Nodira touches the clips together. The bulb lights, so she knows the circuit works. If it had not lit, the fault would be in the cell, bulb or wires.
Material
Predict
Result
coin
conductor
conductor
spoon
conductor
conductor
glass
insulator
insulator
paper
insulator
insulator
Results of a test. A pattern appears: the metals all conduct.
A metal toy car with a painted body may not light the bulb when the clips touch the paint. The paint is an insulator and covers the metal. If the clips touch bare metal on the underside, the bulb lights.
Class activity
Conductor test (with an adult): use a torch cell (1.5 V) and a small bulb in a holder with two wires that have crocodile clips. Never use a socket. First clip the two ends together to check that the bulb lights. Test a spoon, a coin, a paperclip, a rubber, a piece of paper, a plastic spoon and a wooden stick. Predict first and record in a table. Pencil lead (graphite) is a surprise: it is a non-metal that does conduct. Which materials are conductors and which are insulators?
Practice
1
Why should you touch the clips together before testing a material?
To check that the circuit and bulb work. If the bulb does not light, the fault is in the circuit, not the material.
2
Explain how the test shows that a coin is a conductor.
When the coin is in the gap the bulb lights, so current flows through it and it is a conductor.
3
A steel spoon with a plastic handle is tested at the handle and the bulb stays off. Is steel an insulator? Explain.
No. The handle is plastic, an insulator. The bulb will light if the clips touch the bare steel.