AdvertisementYour brand could be hereYour brand hereOn every Darslab page · students, parents and teachersinfo@darslab.comAsk for pricesPricesinfo@darslab.com
☰ Year plan · Science

Conductors and insulators

Week 34 · Unit 9 · 9.4 · 3 lessons
2

Insulators and what they are for

Learner’s Book 7: Topic 9.4, pp. 303–309
GoalDefine an insulator, explain why it stops current and give uses of conductors and insulators.
New words
insulator · a material that does not let electric current flow through itinhibit · to hold back or slow downplastic coating · a layer of insulator around a metal wirepylon · a tall metal tower that carries power lines
Explanation

An insulator is a material that does not let electric current pass. In an insulator the electrons are held in place, so they cannot flow. Plastic, rubber, glass, dry wood, cotton and air are all insulators. Insulators protect us. The plastic coating on a cable stops us touching the metal, and coloured plastic also helps electricians tell the wires apart. A plug has a plastic body so it is safe to hold, but its pins are metal so that current can reach the machine. On tall power lines, glass or ceramic insulators hold the wires away from the metal tower.

ObjectConductor partInsulator part
bicycle lampmetal contactsplastic case
extension leadcopper wire insideplastic coating
electrician’s screwdrivermetal bladerubber handle
Worked examples
wood−+
A piece of wood in the gap does not let the current through, so the bulb stays off.
metal wireplastic coating
A cable is a metal wire with a plastic coating. The metal is the conductor and the plastic is the insulator.
bladehandle
An electrician’s screwdriver has a metal blade, which is a conductor and is strong, and a rubber handle, which is an insulator and keeps the electrician’s hand safe.
Class activity

Torch detective (with an adult): take a battery torch apart only as far as an adult says is safe, or look at a toy that uses small batteries. Do not use or open anything that plugs into the mains. Find the metal parts and the plastic parts. Draw the torch and label each part ‘conductor’ or ‘insulator’. Why is the case plastic? Why are the contacts and the spring metal? Then sort five more objects around the house into conductors and insulators and explain each in one sentence. Keep away from sockets.

Practice
1
Give two examples of insulators and say why they stop current.
2
The case of a torch is plastic, but the spring inside it is metal. Why?
Part of the torchMaterial
caseplastic
springmetal
3
A cable has a crack in its plastic coating, and a little bare copper shows. Why is this dangerous, and who should mend it?
coatingbare copper
4
Why are glass or ceramic insulators placed between a power line and its tower?