GoalRead tables and bar charts about metals and alloys and use them to answer questions.
New words
melting point · the temperature at which a solid turns into a liquidrange · from the smallest to the largest valuecarat · a way to show how much gold is in gold jewellery; pure gold is 24 caratpure · made of one thing only
Explanation
Scientists use tables and charts to compare metals and alloys. A pure metal melts at one exact temperature. An alloy has a range of melting points, because makers can use different amounts of each metal. For example, tin melts at 232 °C and lead at 327 °C, but the solder once made from the two melts at about 183–190 °C, lower than both. This shows that an alloy can behave quite differently from the metals in it. Gold jewellery is marked in carats. Pure gold is 24 carat, so all 24 of the 24 parts are gold, while 9 carat gold has only 9 parts gold and 15 parts other metals such as copper. The higher the carat number, the purer and softer the gold.
Substance
Type
Melting point
tin
pure metal
232 °C
lead
pure metal
327 °C
aluminium
pure metal
660 °C
iron
pure metal
1538 °C
solder (tin + lead)
alloy
about 183–190 °C
stainless steel
alloy
about 1400–1450 °C
Worked examples
Look at the chart of three pure metals. Tin melts at the lowest temperature and aluminium at the highest. Solder, an alloy of tin and lead, melts at a lower temperature than either metal.
Why does solder have a range of melting points but tin has just one number? Solder is a mixture, and the recipe can change: a little more tin or a little less gives a slightly different melting point.
Gold
Parts gold out of 24
Parts other metals
24 carat
24
0
22 carat
22
2
14 carat
14
10
9 carat
9
15
Aisha’s ring is marked 14 carat. That means 14 of the 24 parts are gold and 10 parts are other metals.
Class activity
Design an alloy (paper only): choose a job, such as a bridge, a bell, a key ring or a spoon. Choose two metals to mix for it. Look up their properties (hardness, price, colour, rust). Write a short report: which metals, what the object is for, why an alloy and not a pure metal, and one limit of your idea. Draw the object and label it. Then make a table of three real alloys and their uses from the lessons.
Practice
1
Look at the chart. Which metal melts at the lowest temperature? Which of them are liquid at 700 °C?
Zinc melts at the lowest temperature. At 700 °C zinc and magnesium are liquid, but silver is still solid.
2
A book says stainless steel melts at about 1400–1450 °C, but pure iron melts at 1538 °C. Why is a range given for the alloy?
Substance
Melting point
iron
1538 °C
stainless steel
1400–1450 °C
There are many recipes for stainless steel with different amounts of each metal, so each melts at a slightly different temperature.
3
A ring is marked 14 carat. How many of the 24 parts are gold, and how many are other metals?
14 parts are gold and 10 parts are other metals.
4
Which ring is the softest: A, B or C? Explain.
Ring
Mark
A
22 carat
B
9 carat
C
14 carat
Ring A (22 carat), because it has the most gold and pure gold is soft; the other metals make the gold harder.