الأسبوع 9 · الفصل الخامس «خواص الموائع الساكنة» (١): الضغط والضغط داخل السائل P = Pa + ρgh والأواني المستطرقة والسد والأنبوبة U بسائلين والبارومتر الزئبقي ووحدات الضغط · 3 دروس
2
Pressure grows with depth: P = Pa + ρgh
Physics Sec 2 Term 1, Unit 3: pp. 62–67
GoalDerive P = hρg for the liquid alone, add atmospheric pressure, and use g = 10 m/s².
New words
P = hρg · the pressure of a liquid column of height h and density ρ; it does not depend on the shape of the vesselatmospheric pressure Pa · the pressure of the air above the liquid surface, about 1.013 × 10⁵ Paconnecting vessels · vessels joined at the bottom; the liquid stands at the same level in all of them
Explanation
Imagine a column of liquid of height h and cross-section A above a flat plate. Its volume is Ah, its mass is Ahρ and its weight is Ahρg. Pressure is force divided by area, so P = Ahρg ÷ A = hρg. This is the pressure caused by the liquid alone, and it grows in proportion to the depth h and the density ρ. If the surface is open to the air, the air adds its own pressure Pa, so the total pressure at depth h is P = Pa + hρg. All points at the same level in one liquid have the same pressure. Connecting vessels fill to one level whatever their shape, and a dam wall is thicker at the base where the pressure is greatest. In the calculations here we use g = 10 m/s² and ρ(water) = 1000 kg/m³.
Worked examples
Use g = 10 m/s². In a pool at a depth of 5 m the pressure due to the water is P = hρg = 5 × 1000 × 10 = 5 × 10⁴ Pa. With the air above (Pa = 1.013 × 10⁵ Pa), the total is 1.013 × 10⁵ + 5 × 10⁴ = 1.513 × 10⁵ Pa. The graph shows both lines: the water alone and the total.
Sea water (ρ = 1030 kg/m³) at a depth of 20 m with g = 10 m/s²: P = hρg = 20 × 1030 × 10 = 2.06 × 10⁵ Pa from the water. The pressure is greater than in fresh water at the same depth because the density is greater.
Why is the base of a dam thicker than its top? The water pressure P = hρg grows with depth, so the force on the wall is greatest at the bottom. At 8 m the pressure from the water alone is 8 × 1000 × 10 = 8 × 10⁴ Pa; near the surface it is almost zero.
Class activity
Depth and pressure in a tube, with a grown-up. Use a tall clear plastic bottle with three small holes at different heights made by an adult (the holes closed with tape). Fill it with water in a sink or a tray and remove the tape. Watch how far each jet reaches. Explain with P = hρg why the lowest jet goes farthest. Also level two cups with a clear plastic tube filled with water (connecting vessels): the water stands at one level in both.
Practice
1
Use g = 10 m/s². Find the pressure due to water at a depth of 3 m and the total pressure (Pa = 1.013 × 10⁵ Pa).