الأسبوع 11 · الفصل الخامس «خواص الموائع الساكنة» (٣): قاعدة باسكال والمكبس الهيدروليكي (القوة والفائدة الآلية والإزاحة) والفرامل والرافعات الهيدروليكية ومسألة محلولة وملخص الفصل · 3 دروس
1
Pascal's principle
Physics Sec 2 Term 1, Unit 3: pp. 72–76
GoalState Pascal’s principle and use it to find how a added pressure spreads through a liquid.
New words
Pascal’s principle · pressure applied to a liquid in a closed container is passed on without loss to every part of the liquid and to the wallsincompressible · its volume hardly changes when it is squeezed, as with a liquidenclosed liquid · a liquid in a closed container, so it cannot escape
Explanation
Blaise Pascal discovered how pressure spreads in a liquid. Pascal’s principle says that pressure applied to an enclosed liquid reaches every part of the liquid undiminished and also pushes on the walls of the container. This works because a liquid is almost incompressible: it cannot be squeezed into a smaller volume, so the push has to go somewhere. If an extra pressure ΔP is applied at the surface, the pressure at depth h becomes P = P₁ + hρg + ΔP, where P₁ is the pressure at the surface before the push. The extra pressure is the same everywhere, near the piston or far away from it. The pressure from the depth, hρg, is still there on top of it. This idea is the basis of every hydraulic machine.
Where
Pressure from depth (Pa)
Added by the push (Pa)
Total change (Pa)
near the surface
0
20 000
20 000
at 0.5 m depth
5000
20 000
25 000
at 1 m depth
10 000
20 000
30 000
Worked examples
A plastic syringe without a needle is full of water and closed. A force of 20 N acts on a plunger of area 4 × 10⁻⁴ m². The added pressure is ΔP = F ÷ A = 20 ÷ (4 × 10⁻⁴) = 5 × 10⁴ Pa. By Pascal’s principle this extra pressure reaches every part of the water and the syringe walls equally.
Use g = 10 m/s². A closed tank of water has a piston that adds 2 × 10⁴ Pa at the surface. At 0.5 m depth the pressure change from the water is 0.5 × 1000 × 10 = 5000 Pa, so the total change above the surface value is 5000 + 20 000 = 25 000 Pa. The depth part grows with h; the added part is the same everywhere.
Why do hydraulic machines use a liquid and not air? Air is easily compressed: pushing a piston makes the air smaller and denser instead of passing the push on at once. A liquid is almost incompressible, so the push passes on at once.
Class activity
Squeeze and see, with a grown-up. Fill a plastic bottle with water to the top, make three small holes at different heights (an adult does this with a safe tool), keep them closed with tape and put the bottle in a sink. Remove the tape and squeeze the bottle gently: see how all three jets respond. Write what this shows about pressure passing through the water. Use a plastic syringe, without a needle, filled with water and closed to feel how hard it is to squeeze compared with air.
Practice
1
State Pascal’s principle in your own words.
Pressure put on a liquid in a closed container is passed on equally to every part of the liquid and to the walls.
2
A force of 30 N acts on a piston of area 5 × 10⁻⁴ m². Find the added pressure.
ΔP = 30 ÷ (5 × 10⁻⁴) = 6 × 10⁴ Pa.
3
Why is a liquid better than a gas for passing on a push?
A liquid is almost incompressible, so the push passes on at once without squeezing the liquid.
4
The pressure added by a piston is 2 × 10⁴ Pa. How much does it add at 1 m depth and at the surface?