الأسبوع 11 · الفصل الخامس «خواص الموائع الساكنة» (٣): قاعدة باسكال والمكبس الهيدروليكي (القوة والفائدة الآلية والإزاحة) والفرامل والرافعات الهيدروليكية ومسألة محلولة وملخص الفصل · 3 دروس
3
Hydraulic brakes and lifts, and a worked press problem
Physics Sec 2 Term 1, Unit 3: pp. 72–76
GoalDescribe hydraulic brakes and lifts and solve a press problem in four steps, including the mass.
New words
master cylinder · the cylinder pushed by the brake pedal; it sends pressure through the brake fluidwheel cylinders · cylinders at the wheels that push the brake shoes or padsfriction · the force between surfaces that slows the wheel
Explanation
Hydraulic brakes use Pascal’s principle. The driver’s foot pushes the pedal, which pushes a piston in the master cylinder. The pressure travels through the brake fluid, a liquid, to the wheel cylinders. There, pistons push brake shoes (drum brakes) or pads (disc brakes) against a turning part, and friction slows the wheel. All four wheels get the same pressure. Car lifts and excavators use the same idea: a small force on a small piston gives a large force on a large piston. To solve a press problem, follow four steps: write a, A, f in consistent units, find MA = A/a, find F = MA × f and, if the problem asks for a mass, divide the force by g: m = F ÷ g. Cars, roads and brakes are only words and pictures here; never test a real vehicle.
foot pushes the pedal→master cylinder→brake fluid carries the pressure→wheel cylinders→pads or shoes press, friction slows the wheel
Worked examples
A lift has a small piston of 20 cm² and a large piston of 600 cm². A force of 100 N is applied. MA = 600 ÷ 20 = 30. F = 30 × 100 = 3000 N. The mass supported (g = 10 m/s²) is m = F ÷ g = 3000 ÷ 10 = 300 kg. Do not stop at the force when the problem asks for a mass.
To lift a car of mass 1500 kg (weight 15 000 N) with a press of MA = 100, the force needed is f = F ÷ MA = 15 000 ÷ 100 = 150 N. For the lift in the previous example, if the small piston moves 0.6 m, the large one moves 0.6 ÷ 30 = 0.02 m. Work in: 100 × 0.6 = 60 J; work out: 3000 × 0.02 = 60 J.
Why is brake fluid, not air, used in hydraulic brakes? A liquid is almost incompressible, so the push on the pedal passes on at once to the wheel cylinders. Air would be squeezed, and part of the pedal’s movement would be lost in compressing it.
Class activity
Press problem practice, with a grown-up. Make a table with columns a, A, f, MA, F and m for four invented presses, such as (4 cm², 100 cm², 20 N), (10 cm², 500 cm², 60 N), (2 cm², 80 cm², 25 N) and a press of your own. Fill it in by the four steps, using g = 10 m/s². Check each answer by seeing that the force grew by the same ratio as the area. Say in one sentence what a press cannot do.
Practice
1
A press has a = 2 cm², A = 100 cm² and f = 30 N. Find MA and F, and the mass F can support (g = 10 m/s²).
MA = 50; F = 50 × 30 = 1500 N; m = 1500 ÷ 10 = 150 kg.
2
A car of 1500 kg is lifted by a press with MA = 100 (g = 10 m/s²). Find the force on the small piston.
Weight 15 000 N; f = 15 000 ÷ 100 = 150 N.
3
Put in order: wheel cylinders, pedal, master cylinder, brake fluid, pads.