Messages without wires
Answers are for parents and teachers.
1
Give two differences between wired and wireless transmission.
Wired uses a cable and the signal is usually steady, but the devices cannot move far. Wireless uses radio waves, so there is no cable, but the signal can get weaker with distance and walls.
2
Two micro:bits are in group 8. The sender sends 6 when A is pressed. The receiver shows the number that arrived. A is pressed twice. What does the receiver show after each press?
6 and then 6 again. Each message carries the number 6.
3
Why must both micro:bits use the same group number?
Only micro:bits in the same group hear each other. Messages from another group are ignored.
4
A receiver starts with total 0 and adds each message. The messages are 4, 4 and 5 in that order. What does it show after each message?
4, then 8, then 13.
5
What goes in on start for the radio, and what goes in on radio received?
on start: radio set group with the group number (and set a variable to its starting value). on radio received: the blocks that use the arriving value, such as show number (receivedNumber).