GoalUse circuit diagrams, ammeter readings, conductors and the effect of changing components to answer new questions.
New words
series circuit · a circuit with one loop, where the current goes through each part in turncurrent · the flow of electrons round a circuit, measured in amps (A)conductor · a material that lets an electric current flow through itinsulator · a material that does not let an electric current flow through it
Explanation
A cell pushes electrons round a complete circuit, and this flow is the electric current. A circuit diagram uses standard symbols for the cell, lamp, switch, motor and ammeter. An ammeter measures current in amps (A) and it is connected in the loop, in series. In a series circuit the current is the same everywhere, because it is not used up. More cells push more current and make a lamp brighter. More lamps in the same circuit make the current smaller and each lamp dimmer. Metals are conductors, and plastic, rubber and dry wood are insulators that are used to cover wires. A conclusion should match the numbers in the results.
Worked examples
Scale
Divisions
Pointer at
Reading
0–1 A
10
6th mark
0.6 A
0–2 A
10
7th mark
1.4 A
0–0.5 A
5
3rd mark
0.3 A
Nadia reads three ammeter scales. She finds the value of one division first, then counts up from zero to the pointer.
A metal key is put into the gap of a circuit. The bulb lights, so the key is a conductor. If the key is covered in paint, the paint is an insulator and the bulb may stay off.
Dilnoza measures the current in a circuit with one lamp as she adds cells. A good conclusion uses numbers: as the number of cells increased from 1 to 4, the current rose from 0.15 A to 0.61 A, so more cells make a bigger current.
Class activity
Torch inspection, with an adult. Look at a battery torch. The adult takes it apart and you find the cell, the switch, the bulb and the metal strip or spring. Draw a circuit diagram of it with the symbols. Mark which parts are conductors and which are insulators (the casing is usually plastic). Then the adult takes the cell out and asks what will happen when you press the switch. Check that you are right. Never use a plug or a socket, and use only small cells.
Practice
1
Predict whether the bulb lights, and use the word electrons to explain.
The bulb does not light. The switch is open, so there is a gap in the circuit and the electrons cannot flow all the way round.
2
The ammeter reads 0.3 A. What would it read if it were moved to the other side of the lamps, next to the cell? What happens to the reading if a third lamp is added to the circuit?
It would still read 0.3 A, because the same current flows at every point in a series circuit. With a third lamp the current gets smaller.
3
Write a conclusion that matches the evidence. Then name one thing that would make you more sure.
Material tested in the gap
Bulb
brass screw
lit
rubber eraser
not lit
glass marble
not lit
aluminium foil
lit
The brass screw and the foil conduct electricity (they let the current through), while the eraser and the marble are insulators. More sure: test more samples of each material and repeat the tests.
4
An ammeter scale goes from 0 to 1 A with 5 divisions. The pointer is on the 4th mark. What is the reading?
Each division is 1 ÷ 5 = 0.2 A, so the reading is 4 × 0.2 = 0.8 A.