GoalRead an ammeter scale correctly and record the unit.
New words
scale · the numbers and marks on a meterdivision · one small step between two marks on a scalepointer · the needle that moves along the scalereading · the value you read from a meter
Explanation
To read an ammeter, first find the pointer on the scale. Look at the last whole number that it has passed. Then work out what one small division is worth: divide the gap between two numbers by the number of divisions in that gap. For example, with ten divisions between 0 and 1, each one is 0.1 A. Count the divisions from that whole number to the pointer and multiply. View the pointer from straight in front, not from the side. Before you switch on, check that the pointer is at zero. Finally, write the reading with its unit, A.
Scale
Divisions in all
Value of one division
0 to 1 A
10
0.1 A
0 to 2 A
10
0.2 A
0 to 5 A
5
1 A
Worked examples
Marks passed
Value of each mark
Reading
5
0.1 A
0.5 A
The pointer is on the fifth mark between 0 and 1 A, and each mark is 0.1 A. The reading is 0.5 A.
Whole number passed
Divisions after it
Reading
2
2
2 + 2 × 0.2 = 2.4 A
A scale goes 0, 1, 2, 3 A with five divisions between each pair of numbers. Each division is 0.2 A. A pointer on the second division after 2 reads 2.4 A.
Tom’s readings in two circuits: circuit 1 gives 0.2 A and circuit 2 gives 0.6 A, so the electrons move faster in circuit 2.
Class activity
Dial detective (with a family member): find dials with a pointer and a scale at home, for example a kitchen scale, a clock face, a car speedometer in a picture or a thermometer. For each, find the value of one small division by dividing the gap between two numbers by the number of divisions. Then take readings and write them with their units. Which dial was hardest to read? Why? Remember that an ammeter is read in the same way, and its unit is A.
Practice
1
A scale from 0 to 1 A has ten divisions. The pointer is on the seventh mark. What is the reading?
Scale
Pointer
0 to 1 A, ten divisions
on the 7th mark
0.7 A.
2
A scale goes 0, 1, 2 A with five divisions between each pair of numbers. The pointer is three divisions past 1 A. What is the reading?
Scale
Divisions between numbers
Pointer
0, 1, 2 A
5
3 divisions past 1 A
Each division is 0.2 A, so the reading is 1 + 3 × 0.2 = 1.6 A.
3
Why must you write the unit with the reading?
Without the unit A the number does not tell what was measured or how big it is.
4
An ammeter pointer is not at zero before the switch is closed. What should you do?
Tell the teacher or adult. The meter may need adjusting before it is used.