GoalRecognise and draw the symbols for a cell, switch, lamp, buzzer and ammeter, and read what a circuit diagram could be used for.
New words
circuit diagram · a drawing of a circuit that uses standard symbolscircuit symbol · a simple agreed drawing for a componentammeter · a meter that measures currentcomponent · a part of a circuit, such as a lamp or a buzzer
Explanation
Instead of drawing the real objects, we draw circuit diagrams. Each component has a standard symbol, so people in every country can read the same diagram. Wires are drawn as straight lines with sharp corners. The lines must not have gaps, and a wire must never be drawn through a component. In the symbol for a cell, the long line is the positive side. A diagram is quicker to draw than a picture and easier to read. Different circuits do different jobs: a buzzer joined to a cell and a switch makes an alarm, while a cell and switch with a lamp and an ammeter show how much current the lamp takes.
Worked examples
The picture above uses all five symbols you need at Stage 7: a cell, a closed switch, a lamp, a buzzer and an ammeter. The ammeter reads the size of the current, and the buzzer makes a sound. The long line of the cell is the positive side.
A torch has a cell, a switch and a lamp. When you press the switch the circuit is complete and the lamp lights.
A shed alarm has a cell, a switch and a buzzer. The switch is pushed closed when the door opens, and then the buzzer sounds.
Class activity
Symbol cards (with a family member): make five small cards, each with one circuit symbol on one side and its name on the other. Use them to test each other. Then draw a circuit diagram for a shed alarm with a ruler and the symbols, leaving no gaps. Swap diagrams and check each other’s. Can two different diagrams both be correct? Name one job for each circuit you drew.
Practice
1
Name the five components whose symbols you need at Stage 7 and say in a few words what each one does.
Cell: pushes the current round. Switch: opens or closes the circuit. Lamp: gives out light. Buzzer: makes a sound. Ammeter: measures the current.
2
The switch in the picture is open. What would the ammeter show now? What would it show when the switch is closed?
With the switch open there is no current, so the ammeter reads zero. When the switch is closed a current flows and the ammeter shows its size.
3
Look at the circuit diagram. Which component shows the size of the current, and which one makes a sound?
The ammeter (A) shows the size of the current. The buzzer makes the sound.
4
Why do people in all countries use the same circuit symbols?
So that anyone can read any diagram without confusion, even if they do not speak the same language.