GoalPlan and read a line graph of water being heated or ice melting and explain the flat part.
New words
variable · something that can change in an investigationflat section · the part of a line graph where the line stays levelprediction · a sensible guess about what will happen, made before you testanomalous result · a result that does not fit the pattern
Explanation
Many investigations measure how one thing changes with time. We put time along the horizontal axis and temperature up the vertical axis, plot each point and join them in a smooth line. When water is heated, its temperature rises steadily until it reaches the boiling point, 100 °C. Then the line goes flat, because the water keeps boiling and the temperature stays the same. The flat section happens because the heat is now used to change the liquid into a gas, not to make the water hotter. Ice does the same at 0 °C when it melts. Keep the thermometer in the middle of the water, away from the bottom of the container, or it will show the temperature of the container instead of the water. If one point does not fit the pattern, it is an anomalous result, and we should repeat it. Only adults heat water.
Worked examples
An adult heats water in a pan while Ana, standing back, writes the temperature every minute. Her graph rises and then goes flat at 100 °C. The flat part means the water is boiling.
Minutes
0
2
4
6
8
10
Temperature (°C)
0
0
0
1
5
9
Cold investigation: crushed ice is left in a cup in a room and the temperature is measured every two minutes. The temperature stays near 0 °C while the ice melts, then it rises.
Minute
0
2
4
6
Temperature (°C)
20
44
90
68
One point does not fit the pattern. The temperature rises by about 12 °C every two minutes, so at 4 minutes it should be about 56 °C, but the table shows 90 °C. This is an anomalous result. Repeat the measurement to check.
Class activity
Ice temperature test (no heating; adult nearby): put a few ice cubes with a little cold water in a clear cup. Use a kitchen or digital thermometer to measure the temperature every two minutes for 20 minutes. Record in a table. Predict first: will the temperature rise steadily? Plot a line graph with time along the bottom. Look for the flat part. Keep the thermometer in the middle of the cup, not touching the sides or bottom. What is your explanation for the flat part?
Practice
1
Describe the shape of the graph for heating water in the explanation, and explain the flat part.
The temperature rises steadily from 20 °C to 100 °C, then the line goes flat at 100 °C. The water is boiling, and the heat is used to turn water into steam, so the temperature stays the same.
2
Use the table to find the melting point of the substance and say which minutes it is melting.
Minute
0
2
4
6
8
10
12
Temperature (°C)
30
42
54
54
54
54
60
The temperature is flat at 54 °C from 4 to 10 minutes, so the melting point is 54 °C and it is melting during those minutes.
3
Ravi’s thermometer read 106 °C while the water in the pan was boiling. Pure water boils at 100 °C. Suggest a reason for his reading.
The thermometer was probably touching the bottom of the pan, which is hotter than the water. It should hang in the middle of the water. (Misreading the scale is also possible.)
4
Find the anomalous result and say what you should do about it.
The 6 minute point (22 °C) does not fit the pattern: the points around it are 60 °C and 71 °C. Check it by repeating the measurement.