GoalUse a table and a line graph to show how pH changes as acid is added, and describe how to test a soil sample.
New words
burette · a long glass tube with a tap, used to add exact amounts of a liquidfiltrate · the liquid that passes through a filter paperline graph · a graph that joins points to show how one thing changes as another changestrend · the pattern in a set of results
Explanation
A burette is a long tube with a tap that lets a scientist add acid very slowly and measure exactly how much goes in. The scientist writes the volume of acid and the pH in a table. In a line graph of the results, the volume goes along the bottom and the pH goes up the side. At first the pH falls slowly. It then drops steeply as it passes through 7, and afterwards it stays low. The place where the line crosses pH 7 shows how much acid was needed to neutralise the alkali. To test soil, you stir some into water and pour the mixture through filter paper. The clear liquid that comes through is the filtrate, and you add indicator to that.
Worked examples
Acid added (cm³)
0
5
10
15
20
25
30
pH
13
13
12
11
7
3
2
The results of a neutralisation are written in a table before they are drawn.
From the graph in the picture above: the solution is neutral after 20 cm³ of acid, where the line is at pH 7. At 30 cm³ it is pH 2, so too much acid has been added.
To test soil: stir soil into water, filter it, then add indicator to the clear filtrate. The colour shows the pH of the soil water.
Class activity
Draw a graph (with a family member): use the numbers in the lesson table, or invent your own, and draw a line graph on squared paper. Put the volume of acid on the horizontal axis and pH on the vertical axis. Mark every point with a small cross, then join them with a ruler. Draw a dotted line across at pH 7 and read down to the acid volume. Write one sentence about the trend. Check whether your line is steepest near pH 7.
Practice
1
Which axis should show the volume of acid and which the pH when you draw the graph? Explain.
Volume of acid goes on the horizontal axis, because it is the quantity the scientist changes. The pH goes on the vertical axis because it is the quantity that is measured.
2
Read the graph. How much acid was needed to make the mixture neutral, and what happens to the pH after that?
About 12 cm³. After that the pH keeps falling, so the solution becomes acidic.
3
The pH of a flask is 12 at the start. After 8 cm³ of acid it is 11. Predict the pH shortly before the solution becomes neutral. Is it likely to be 3 or 9?
9. The pH falls as acid is added, so it must be between 11 and 7 before it reaches 7.
4
Why is the soil mixture filtered before the indicator is added?
The brown soil would hide the colour of the indicator. The clear filtrate lets you see the true colour.