GoalExplain what a hybrid topology and a bridge are, use a bridge table, and choose a topology for a situation with reasons.
New words
hybrid topology · a network made by joining two or more topologies together at a nodenode · a point where devices or networks connect to the networkbridge · a device that joins two segments of a LAN and passes data only to the segment that needs itMAC address · an address fixed into a device by its maker, different for every device
Explanation
A hybrid topology joins two or more topologies at a node. A common example is a star joined to a bus. It is flexible and keeps the good points of each part, but it costs more and is harder to install. A bridge splits a busy bus into two segments. It keeps a table of the MAC address of each device and the segment it is in. A MAC address is stamped on a device by its maker and names that one piece of hardware, while an IP address is handed to a device by the network it joins. A bridge reads the receiver’s MAC address and sends the packet only into that segment, so the other segment is not flooded with copies. Whatever the topology, malware can spread across a network, so every device needs up-to-date protection that an adult sets up. To choose a topology, compare the cost, how easy it is to extend and what happens when something fails.
Address
Who sets it
What it shows
MAC address
the maker of the device
the physical device
IP address
the network
the device’s place on the network
Worked examples
A hybrid star-bus. A school library has a star of three computers around a switch. The switch is connected to a bus that serves the reading room. Where the two parts meet is the node. The network gets the flexibility of both, but needs more cable and equipment than a single star.
Device
MAC address
Segment
PC A
AA:BB:CC:00:00:01
1
PC B
AA:BB:CC:00:00:02
1
Projector
AA:BB:CC:00:00:03
2
PC C
AA:BB:CC:00:00:04
2
The bridge table. A bus is divided into two segments by a bridge. PC A sends a packet to PC B, which is in the same segment, so the bridge does not copy it into segment 2. PC A sends another packet to the projector. The bridge finds the projector’s MAC address in its table, sees that it is in segment 2 and passes the packet into segment 2 only.
Topology
Cost
If one device or cable fails
Star
a cable for each device
only that device is cut off
Bus
one long backbone
devices beyond a break lose contact
Ring
short cables between neighbours
whole network affected
Choosing with reasons. A family of four wants to link two laptops, a printer and a tablet in one flat. The best choice is a star around one switch or router, because it is easy to set up and one failing cable does not stop the others. A ring would stop everything if a single device were switched off, and a bus would need a long backbone cable. The reasons matter more than the name.
Class activity
Design a network (no computer, no real networks). Choose an invented place, such as a small clinic with five rooms or a school workshop. List the devices it needs, then draw the network as a star, a bus or a hybrid. Write three reasons for your choice and one thing that happens if the centre or a cable fails. Test your plan by pretending that one cable, then the centre, fails and writing who is cut off. Swap with a partner, who must find one advantage and one disadvantage of your choice. Evaluate: write one thing that works well and one change you would make. Never try to look at or test a real network; ask a teacher to explain the school’s network.
Practice
1
Look at the bridge table. PC C sends a packet to PC B. Say which segment the bridge sends it into and why. Where does the packet not go?
Device
MAC address
Segment
PC A
AA:BB:CC:00:00:01
1
PC B
AA:BB:CC:00:00:02
1
Projector
AA:BB:CC:00:00:03
2
PC C
AA:BB:CC:00:00:04
2
PC B is in segment 1 according to the table, so the bridge passes the packet into segment 1 only. It does not go into segment 2, where PC C and the projector are.
2
The picture shows a hybrid of a ring and a bus. Name the topology of each part and say where they join.
The left part is a ring and the right part is a bus. They join at the node marked X.
3
Explain the difference between a MAC address and an IP address.
A MAC address belongs to the hardware from the day it is made and does not change. An IP address is given to the device by the network, so it can be different on another network.
4
A shop with eight tills wants a network that keeps working when one till breaks. Choose a topology and give two reasons. Name one topology that does not suit it, and why.
A star: each till has its own cable, so a failure of one till does not affect the others, and the network can be managed from the centre. A ring does not suit it, because one switched-off till would break the loop for all the others.