GoalDraw views of cube models and scale drawings, use midpoints and column vectors, and convert distances and measure bearings.
New words
elevation · a view of a solid from the front or the sidecolumn vector · two numbers that tell us how far to move across and then up or downback bearing · the bearing of the start point seen from the end point; it differs by 180°
Explanation
The plan shows a solid from above, and the front and side elevations show it from the front and the side. A scale such as 1 : 200 means every length on the drawing is 200 times smaller than in real life. The midpoint of a line segment has coordinates that are the means of the end points’ coordinates. A translation by a column vector (a over b) moves every point a across and b up (negative means left or down). The vector back from B to A is the opposite of the vector from A to B. To change kilometres to miles divide by 8 and multiply by 5. A three-figure bearing is measured clockwise from north, and the back bearing is found by adding or subtracting 180°.
Worked examples
The plan shows the number of cubes in each column. The back row is 2, 1, 0 and the front row is 1, 0, 3. The model has 2 + 1 + 0 + 1 + 0 + 3 = 7 cubes. In the front elevation, each column shows its tallest part: 2, 1, 3. In the side elevation seen from the right, the front is on the left: the front row’s tallest is 3 and the back row’s is 2.
A(−3, 2) and B(5, −4). The midpoint is the mean of each coordinate: x = (−3 + 5) ÷ 2 = 1 and y = (2 + (−4)) ÷ 2 = −1, so M = (1, −1). To go from A to B we move 5 − (−3) = 8 across and −4 − 2 = −6 up, so the vector is (8 over −6). The vector from B to A is (−8 over 6).
A ship sails 40 km from A on a bearing of 070°. In miles this is 40 ÷ 8 × 5 = 25 miles. The bearing of A from B is the back bearing: 070° + 180° = 250°. Check: B is north-east of A, so A is south-west of B, and 250° is south-west.
Class activity
Treasure map: on squared paper mark a start point S at (0, 0) and hide a treasure T at a point such as (6, −4). Write the vector from S to T and the midpoint of ST. Then stand in a room with a compass and find the bearing of the door and a window. Work out the back bearings and check them by walking to those objects and looking back.
Practice
1
The plan of a model shows 1 and 3 in the back row and 2 and 1 in the front row. How many cubes does the model have and what are the heights in the front elevation?
1 + 3 + 2 + 1 = 7 cubes. Front elevation: the left column has tallest 2 and the right column has tallest 3, so heights 2 and 3.
2
A tower is 45 m tall. It is drawn at scale 1 : 500. How tall is the drawing? On the plan a park is 6.4 cm long. What is its real length?
45 m = 4500 cm; 4500 ÷ 500 = 9 cm. Park: 6.4 × 500 = 3200 cm = 32 m.
3
P is (−4, 1) and Q is (6, 7). Find the midpoint of PQ, the vector from Q to P, and the image of P after the translation (3 over −5).
Midpoint: (1, 4). Vector from Q to P: (−4 − 6, 1 − 7) = (−10 over −6). Image of P: (−4 + 3, 1 − 5) = (−1, −4).
4
The bearing of a port P from a lighthouse L is 148°. Find the bearing of L from P. A ship sails the 90 km from L to P. How many miles is that?