Week 27 · Unit 23: 2D representations of 3D shapes · 4 lessons
1
Plan, front and side views of cube models
Student’s Book 8: Unit 23, pp. 209–213
GoalDraw and read the front elevation, side elevation and plan of a solid made from cubes.
New words
elevation · a flat view of a solid seen from the front or from the sideplan · the view of a solid looked at from directly aboveview · what you see when you look at the solid from one direction
Explanation
Engineers and builders do not rely on one picture of a building. They draw a plan, which is the view from above, and elevations, which are views from the front and from the side. For a model made of cubes, look from one direction at a time. In the front elevation you see the tallest column in each position, and hidden cubes behind do not show. In the plan you see the footprint, and writing the number of cubes on each square tells you the height there. The front elevation and side elevation must have the same greatest height. Always check by counting the cubes in the plan numbers and in the 3D picture.
Worked examples
This model has 8 cubes. The plan numbers give the number of cubes in each column. The front elevation shows the tallest column in each position: 3, 2 and 1 cubes high. The side elevation (seen from the right) shows the tallest column in each row, front row first: 3 and 2 cubes high.
To draw the front elevation of this model, look at each column of the plan. The left column has 1 cube at the back and 2 at the front, so the tallest is 2. The middle has 3 at the back and 1 at the front, so the tallest is 3. The right has 0 at the back and 2 at the front, so the tallest is 2. The front elevation is 2, 3, 2 cubes high. Total cubes: 1 + 3 + 0 + 2 + 1 + 2 = 9.
From a plan to a model. The plan numbers are: back row 1, 2; front row 3, 1. The model has 1 + 2 + 3 + 1 = 7 cubes. The front elevation is 3 cubes high on the left (3 is in front of 1) and 2 cubes high on the right (2 is behind 1). The side elevation has the front row first: 3 cubes high, then 2.
Class activity
Build and draw. Build a model with 8 sugar cubes, building blocks or small boxes. Put it on a table, look from the front, then from the right side, then from above, and draw each view on squared paper. Give your three drawings to a partner who must build the same model without seeing it. Check by comparing the views.
Practice
1
Draw the front elevation of this model on squared paper. How many cubes does it have?
The front elevation is three columns, 2, 2 and 3 cubes high (the right column is 3 high because of the 3 at the back). The model has 1 + 0 + 3 + 2 + 2 + 1 = 9 cubes.
2
The plan of a model shows these numbers: back row 2, 0, 1; front row 1, 3, 1. Find the heights in the front elevation and in the side elevation (seen from the right) and the number of cubes.
Front elevation: 2, 3, 1 cubes high. Side elevation from the right: front row first, 3 then 2. There are 2 + 0 + 1 + 1 + 3 + 1 = 8 cubes.
3
Each cube in the model of task 2 above has an edge of 3 cm. What is the volume of the whole model?
Volume of one cube = 3 × 3 × 3 = 27 cm³. The model has 8 cubes, so the volume is 8 × 27 = 216 cm³.
4
Kenji says: ‘The front and side elevations are both a 2 by 1 rectangle, so the model must be a flat 2 by 2 block of 4 cubes.’ Use the plan to decide whether he is right.
He is not right. The model has only 3 cubes, in an L-shape: the plan has an empty corner, but the front and side elevations cannot show it. A flat 2 by 2 block would have the same elevations but a square plan. The plan is needed too.