Week 27 · Unit 23: 2D representations of 3D shapes · 4 lessons
3
Elevations of buildings to scale
Student’s Book 8: Unit 23, pp. 209–213
GoalWork out the sizes for the plan and the front and side elevations of a building made from cuboids, and draw them to scale.
New words
compound shape · a shape made by joining simpler shapesfootprint · the shape a solid makes on the ground, shown on the plan
Explanation
To draw plans and elevations to scale, follow these steps. First list the real measurements of the length, width and height of each part. Then convert every measurement to the drawing size using the scale. Draw the front elevation first. Draw the plan above or the side elevation beside it so that matching parts line up with dotted lines. In an elevation, a step or a change of height shows as a line. The heights in the front and side elevations must agree because they are the same real heights. The width of the side elevation is the depth of the building, and the plan has the width of the front elevation and the width of the side elevation.
Worked examples
A set of 3 steps is made from blocks. Each step is 4 m wide and 8 m deep. The steps are 4 m, 8 m and 12 m high. Scale 1 : 200 (each step is 400 cm wide, so 400 ÷ 200 = 2 cm). Front elevation (drawn here): three columns, each 2 cm wide, with heights 2 cm, 4 cm and 6 cm. Side elevation: a rectangle 4 cm wide (800 ÷ 200) and 6 cm tall. Plan: a rectangle 6 cm by 4 cm, split into three strips of 2 cm.
An L-shaped block of flats is 10 m tall. The unit is 5 m: the plan is two wings, each 5 m wide. The front is 10 m wide, and the side is 10 m deep. Scale 1 : 250: 5 m = 500 cm, 500 ÷ 250 = 2 cm. Height 10 m gives 4 cm. Front elevation: 4 cm by 4 cm. Side elevation: 4 cm by 4 cm. Plan: an L-shape made from three 2 cm squares.
Check that views agree. In the stepped block, the front elevation is 6 cm tall and the side elevation is 6 cm tall, which agrees. The front elevation is 6 cm wide and the plan is 6 cm wide, which agrees. The side elevation is 4 cm wide and the plan is 4 cm from top to bottom, which agrees. If two views disagree, there is a mistake.
Class activity
Build a block city. Use cardboard boxes or blocks to build a small building with at least two different heights. Measure it in centimetres and choose a scale such as 1 : 5. Work out the drawing size of each part and draw the front elevation, side elevation and plan on squared paper, lining up the matching edges.
Practice
1
The model shows blocks where each cube stands for 3 m. Scale 1 : 300. Give the width and height of the front elevation, the side elevation and the plan, in centimetres.
Each cube is 300 cm ÷ 300 = 1 cm. Front elevation: 3 cm wide, columns 1, 2, 2 cm tall. Side elevation: 2 cm wide and 2 cm tall. Plan: 3 cm by 2 cm.
2
A chest is 1.5 m long, 0.9 m deep and 0.6 m high. At a scale of 1 : 30, find the sizes of the front elevation, the side elevation and the plan.
150 ÷ 30 = 5, 90 ÷ 30 = 3 and 60 ÷ 30 = 2. Front elevation 5 cm by 2 cm. Side elevation 3 cm by 2 cm. Plan 5 cm by 3 cm.
3
On a drawing with scale 1 : 400, the front elevation of a tower block is 3 cm wide and 9 cm tall. Its side elevation is 2 cm wide. Find the real width, height and depth.
3 × 400 = 1200 cm = 12 m wide. 9 × 400 = 3600 cm = 36 m tall. 2 × 400 = 800 cm = 8 m deep.
4
Explain why the height of the building must be the same in the front elevation and the side elevation of the same drawing.
Both elevations show the same building, so the real height is the same. They are drawn at the same scale, so the drawn height is the same too. If the heights differ, there is a mistake.