AdvertisementYour brand could be hereYour brand hereOn every Darslab page · students, parents and teachersinfo@darslab.comAsk for pricesPricesinfo@darslab.com
☰ Year plan · Physics

Continuity and viscosity

Week 8 · Chapter 4 (B): steady flow and the continuity equation with worked examples, viscosity, the coefficient of viscosity and its uses, the chapter summary · 3 lessons
1

Steady flow and the continuity equation

Physics Sec 2 Term 1, Unit 3: pp. 53–60
GoalUse the continuity equation A₁v₁ = A₂v₂ and the flow rates Qv and Qm.
New words
steady flow · the pipe is full and the velocity at any point does not change with timeflow rate · the volume (Qv = Av in m³/s) or the mass (Qm = ρAv in kg/s) passing a section each secondcontinuity equation · A₁v₁ = A₂v₂: the same volume flows through each section every second
Explanation

In steady flow a pipe is full of liquid and the velocity at any point does not change with time. A liquid cannot be squeezed much, and mass is conserved, so the amount of liquid that enters the pipe each second equals the amount that leaves it. The volume flow rate through a section of area A at velocity v is Qv = A × v, in m³/s, and the mass flow rate is Qm = ρAv, in kg/s. Since the same volume flows through every section each second, A₁v₁ = A₂v₂: this is the continuity equation. It shows that the speed is inversely proportional to the area, v₂ = v₁ × A₁/A₂, so the water moves faster through the narrow part of a pipe. The volume that passes in a time t is Vol = Avt. Extra: where a fluid moves faster, its pressure is lower (Bernoulli).

SectionArea A (cm²)Speed v (m/s)A × v
18324
24624
321224
Worked examples
Water flows at 3 m/s in a pipe of cross-section 8 cm² and enters a part of cross-section 2 cm². A₁v₁ = A₂v₂ gives 8 × 3 = 2 × v₂, so v₂ = 24 ÷ 2 = 12 m/s. The area is four times smaller, so the speed is four times larger.
A hose of area 4 × 10⁻⁴ m² gives water at 1.2 m/s and ends in a nozzle of area 1 × 10⁻⁴ m². v₂ = (4 × 10⁻⁴ × 1.2) ÷ (1 × 10⁻⁴) = 4.8 m/s. The jet leaves four times faster.
A pipe of radius 2 cm (0.02 m) carries water at 0.5 m/s. A = π × 0.02² = 1.26 × 10⁻³ m². Qv = Av = 1.26 × 10⁻³ × 0.5 = 6.28 × 10⁻⁴ m³/s. In 1 minute: 6.28 × 10⁻⁴ × 60 = 3.77 × 10⁻² m³ = 37.7 litres, which is 37.7 kg of water (ρ = 1000 kg/m³).
Class activity

Thumb over the tap, with a grown-up. At a sink, let water run from a tap or a hose in a gentle stream and see how far it reaches. Then partly cover the opening with a thumb so the opening is smaller and see how the jet changes (do not point it at faces or sockets). Explain with A₁v₁ = A₂v₂: what happened to the area and to the speed? Next, time how long a jug takes to fill to estimate the flow rate in litres per second.

Practice
1
Water at 2 m/s in a pipe of 5 cm² enters a section of 1 cm². Find the new speed.
2
A pipe of area 3 × 10⁻⁴ m² carries water at 2 m/s. Find Qv and the volume in 50 s.
3
Find the mass flow rate for the pipe in the previous question (ρ = 1000 kg/m³).
4
A river widens to twice its cross-section. What happens to the speed of the water?