Three forces at a point, strings, pulleys and sets of forces
Week 6 · Three forces at a point and sets of forces: the three-forces rule (rod and wall, sphere on a wall), strings and smooth pulleys, and the conditions ΣX = 0 and ΣY = 0 · 3 lessons
1
Three non-parallel forces must meet at one point: a rod against a smooth wall, and a smooth sphere hung against a wall
Applied Mathematics Sec 2 Term 1, Unit 1, Lesson 4, Part 2
GoalUse the rule that three non-parallel forces in equilibrium meet at a point to solve a rod against a wall and a sphere hung on a wall.
New words
smooth wall · a wall with no friction: its reaction is perpendicular to ituniform rod · a rod whose weight acts at its midpointconcurrent forces · forces whose lines of action meet at one point
Explanation
A rigid body can stay at rest under three forces that are not parallel only if their lines of action pass through one point. (If two lines met at P and the third missed P, the third force would turn the body about P.) We use this to find the direction of a force we do not know. Facts to remember: the reaction of a smooth surface is perpendicular to the surface; the weight of a uniform rod acts at its midpoint; a string pulls along itself. Example setting: a uniform pole leans on a smooth wall with its foot on rough ground. The wall pushes horizontally at the top (S), the weight W acts down through the midpoint G, and the ground gives one force R′ at the foot. S and W meet at P, so R′ must point from the foot through P. Then the force triangle (or X and Y) gives all sizes. Equilibrium of this kind needs only the concurrency rule; we do not use moments in this course.
Worked examples
A uniform pole of weight 48 N and length 2.6 m leans on a smooth wall, its foot 1 m from the wall on rough ground. The top is √(2.6² − 1²) = 2.4 m up. G is 0.5 m from the wall and 1.2 m up, so P (above G, level with the top) is at height 2.4. R′ points from the foot (1, 0) to P (0.5, 2.4): it has 0.5 across and 2.4 up. So the horizontal part of R′ is 48 × 0.5/2.4 = 10 N (friction), balancing S = 10 N, and the vertical part is 48 N (the normal reaction). R′ = √(48² + 10²) ≈ 49.0 N.
A smooth sphere of weight 24 N and radius 10 cm hangs against a smooth wall by a 16 cm string joined to a point on the sphere and to a point A of the wall. The wall’s reaction S is horizontal and passes through the centre C; the weight passes through C too, so the string’s line also passes through C: AC = 16 + 10 = 26 cm, and C is 10 cm from the wall, so the string makes an angle with the wall whose sine is 10/26 = 5/13, cos = 12/13. Vertically T cos θ = W gives T = 24 × 13/12 = 26 N; horizontally S = T sin θ = 26 × 5/13 = 10 N.
Class activity
Draw the pole example on squared paper (1 square = 0.2 m): the wall, the ground, the pole from (1, 0) to (0, 2.4), the midpoint G, and the vertical line from G up to the horizontal line from the top. Check that the three lines meet at one point. Never use a real ladder or pole for this.
Practice
1
Why is the wall’s reaction on a smooth wall horizontal when the wall is vertical?
A smooth surface gives a force perpendicular to itself, and the perpendicular to a vertical wall is horizontal.
2
A uniform rod weighs 30 N. Where does the weight act, and which way does it point?
At the midpoint, vertically downwards.
3
In the pole example the weight is 96 N and the geometry is the same (foot 1 m, top 2.4 m). Find S and R′.
S = 96 × 0.5/2.4 = 20 N; R′ = √(96² + 20²) ≈ 98.06 N.
4
A smooth sphere (weight 24 N, radius 9 cm) hangs on a wall by a 6 cm string. Find the string’s angle with the wall.
AC = 6 + 9 = 15, sin θ = 9/15 = 0.6, θ ≈ 36.9°.
5
Three forces meet at a point but one of them is vertical and the other two are both horizontal. Can they be in equilibrium?
No: the vertical force has no vertical force to balance it.