إعلانيمكن أن تكون علامتك التجارية هناعلامتك التجارية هنافي كل صفحة من Darslab · طلاب وأولياء أمور ومعلمونinfo@darslab.comاسأل عن الأسعارالأسعارinfo@darslab.com
☰ خطة العام · الكيمياء (بالإنجليزية)

Molarity, dilution and Chapter 1 practice

الأسبوع 4 · الباب الأول (٤): التركيز المولاري والتخفيف والعلاقة M1V1 = M2V2 وتدريب من إعداد Darslab على المحاليل والمعادلات معًا · 3 دروس
2

Dilution and M1V1 = M2V2

Chemistry Sec 2 Term 1, Chapter 1: pp. 17–18
GoalUse M₁V₁ = M₂V₂ to find the final concentration, the final volume or the water to add when a solution is diluted.
New words
dilution · adding solvent (water) to a solution: the volume grows and the concentration fallsM₁V₁ = M₂V₂ · moles before dilution equal moles after dilution; 1 = concentrated, 2 = diluted
Explanation

When water is added to a solution, the amount of solute does not change: only the volume grows, so the concentration falls. The moles before are M₁ × V₁ and the moles after are M₂ × V₂, and they are equal: M₁V₁ = M₂V₂. Here 1 means the concentrated solution and 2 the diluted one. Use any one volume unit on both sides, litres or millilitres, so long as it is the same. To find the water to add, take final volume − starting volume = V₂ − V₁; assume the volumes simply add, which is a good approximation for dilute solutions. A common error is to add V₂ itself as the water: the starting volume V₁ is already part of V₂. Check: 2 × 50 mL = 100 and 0.25 × 400 mL = 100, so the moles match.

ƒFormula
M₁V₁ = M₂V₂ ; water to add = V₂ − V₁
same unit of volume on both sides; assume volumes add
Worked examples
BeforeAfter
M (mol/L)2.00.25
V (mL)50400
moles0.10.1
50 mL of a 2.0 M solution is diluted to 0.25 M. V₂ = M₁V₁ ÷ M₂ = 2.0 × 50 ÷ 0.25 = 400 mL. Water to add = 400 − 50 = 350 mL. Check by moles: 2.0 × 0.050 = 0.1 mol before and 0.25 × 0.400 = 0.1 mol after.
Find the new concentration. 100 mL of a 0.6 M solution is made up to 300 mL. M₂ = M₁V₁ ÷ V₂ = 0.6 × 100 ÷ 300 = 0.2 M. The volume tripled, so the concentration fell to one third.
Half and top up. A pupil pours away half of a coloured solution, leaving 0.5 of the volume, and fills the cup with water to the old mark. The colour is half as strong: the solute left is half, the volume is the same, so the concentration is halved. Pouring away does not dilute; adding water does.
Class activity

Dilution with colour, with a grown-up. Put 100 mL of coloured water in a clear cup and note the colour. Pour 50 mL into a second cup and add 50 mL of tap water; then pour 50 mL of that into a third cup and add 50 mL of water. See what happens to the colour in each cup, and write the concentration of each as a fraction of the first (1, ½, ¼). Check with M₁V₁ = M₂V₂ that 50 mL of the first diluted to 100 mL gives ½. Do not drink the water.

Practice
1
20 mL of a 3.0 M solution is diluted to 0.5 M. Find the final volume and the water to add.
2
25 mL of a 0.8 M solution is made up to 100 mL. What is the new molarity?
3
What volume of a 1.0 M stock solution is needed to make 250 mL of a 0.1 M solution?
4
Does diluting a solution change the number of moles of solute? Explain in one sentence.