إعلانيمكن أن تكون علامتك التجارية هناعلامتك التجارية هنافي كل صفحة من Darslab · طلاب وأولياء أمور ومعلمونinfo@darslab.comاسأل عن الأسعارالأسعارinfo@darslab.com
☰ خطة العام · الرياضيات التطبيقية (بالإنجليزية)

Equilibrium on a rough inclined plane

الأسبوع 8 · اتزان جسم على مستوى مائل خشن: العلاقة بين زاوية الاحتكاك وزاوية الميل، وقوة تؤثر في اتجاه خط أكبر ميل، وحالتا الحركة الوشيكة لأعلى ولأسفل · 3 دروس
3

About to move up and about to move down: two limiting cases solved together for θ and μ

Applied Mathematics Sec 2 Term 1, Unit 1, Lesson 6
GoalUse the two limiting cases (about to move up and about to move down) together to find θ and μ.
New words
limiting equilibrium · equilibrium with friction at its largest value μNtwo limiting cases · about to move up (friction down the slope) and about to move down (friction up the slope)
Explanation

For a body on a rough slope held by a pull P up the slope, the pull can lie between two limits. The largest pull before the body moves up has friction at its limit pointing down the slope: P₁ = W sin θ + μN. The smallest pull that keeps the body from sliding down has friction at its limit pointing up the slope: P₂ = W sin θ − μN. Adding and subtracting: W sin θ = (P₁ + P₂)/2 and μN = (P₁ − P₂)/2, with N = W cos θ. So if the two pulls are measured we get sin θ and then μ = (P₁ − P₂) / (2W cos θ). Conversely, for given W, θ and μ the pull may take any value from P₂ to P₁ (if P₂ would be negative, no pull is needed to keep it at rest). The same body, then, is held by a whole range of pulls, not one.

CaseFriction actsPull needed
about to move updown the slopeP = W sin θ + μN
about to move downup the slopeP = W sin θ − μN
Worked examples
A block of weight 26 N on a slope is about to move up when the pull is 18 N, and about to move down when the pull is 8 N. Then W sin θ = (18 + 8)/2 = 13 N, so sin θ = 0.5 and θ = 30°. μN = (18 − 8)/2 = 5 N with N = 26 cos 30° ≈ 22.52 N, so μ = 5 / 22.52 ≈ 0.222.
A 60 N block: the pull to start it moving up is 36 N and to stop it sliding down is 12 N. W sin θ = 24, sin θ = 0.4, θ ≈ 23.6°. μN = 12, N = 60 cos θ ≈ 54.99 N, μ ≈ 0.218.
A block of weight 50 N is on a slope with sin θ = 0.6 (so cos θ = 0.8) and μ = 0.5. W sin θ = 30 N, N = 40 N, μN = 20 N. The pull may lie between 30 − 20 = 10 N and 30 + 20 = 50 N.
Class activity

Use the tilted board with an eraser and a spring scale (as in the last lesson). Measure P₁ (about to move up) and P₂ (about to move down). Compute W sin θ = (P₁ + P₂)/2 and compare it with the weight of the eraser times h / s, where h is the height of the raised end and s the board’s length.

Practice
1
A 50 N block is on a slope with sin θ = 0.6 and μ = 0.5. Find the smallest pull up the slope that keeps it at rest and the largest.
2
Find θ and μ if a 32 N block is about to move up under 20 N and about to move down under 4 N.
3
A 45 N block on a 35° slope has μ = 0.6. Does it stay at rest with no pull? What is the smallest pull up the slope that holds it?
4
If P₂ comes out negative, what does that mean?
5
Why are there two limiting cases but only one value of μ?