إعلانيمكن أن تكون علامتك التجارية هناعلامتك التجارية هنافي كل صفحة من Darslab · طلاب وأولياء أمور ومعلمونinfo@darslab.comاسأل عن الأسعارالأسعارinfo@darslab.com
☰ خطة العام · الرياضيات التطبيقية (بالإنجليزية)

Friction and equilibrium on a rough horizontal plane

الأسبوع 7 · الاحتكاك: السطوح الملساء والخشنة، والاحتكاك السكوني وحدّه النهائي، والاحتكاك الحركي، ورد الفعل المحصل وزاوية الاحتكاك، واتزان جسم على مستوى أفقي خشن · 3 دروس
2

Kinetic friction F = μN, the resultant reaction R′ and the angle of friction: tan λ = μ

Applied Mathematics Sec 2 Term 1, Unit 1, Lesson 5
GoalUse kinetic friction F = μN, the resultant reaction R′ = √(N² + F²) and the angle of friction tan λ = μ.
New words
kinetic friction · friction on a body that is sliding: Fk = μk Nresultant reaction R′ · the resultant of N and the friction Fangle of friction λ · the angle between R′ and N when friction is limiting
Explanation

Once a body is sliding, friction is smaller than the limiting value and stays about constant: the kinetic friction Fk = μk N, with μk usually a little less than μs. (This is why it takes a push to start a wardrobe moving but less to keep it moving.) The two forces from the surface, N and F, have one resultant, the resultant reaction R′ = √(N² + F²). It leans from the normal by an angle whose tangent is F/N. When the friction is limiting, F = μN, and this angle is called the angle of friction λ: tan λ = Fl / N = μ. So μ = tan λ (not tan μ = λ): the bigger the coefficient, the more R′ can lean. If R′ would have to lean more than λ, the body slides.

NR′λF = μNO
Worked examples
A block of weight 30 N slides along a table at a steady speed when pulled by a horizontal 9 N force. Steady speed means the forces balance, so the kinetic friction is 9 N. N = 30 N, so μk = 9/30 = 0.3.
NR′λF = μNO
A block of weight 25 N rests on a surface with μ = 0.4 and is about to slide. N = 25 N, Fl = 0.4 × 25 = 10 N, R′ = √(25² + 10²) = √725 ≈ 26.93 N. tan λ = 10/25 = 0.4, so λ ≈ 21.8° (the figure shows N = 5, F = 2 to scale).
Class activity

Draw a right triangle with the vertical side N = 10 cm and the horizontal side F = 4 cm (so μ = 0.4). Measure the hypotenuse R′ and the angle λ with a protractor, and compare with the calculation. Then draw it again for μ = 0.8.

Practice
1
Find the angle of friction when μ = 0.75.
2
The angle of friction is 45°. What is μ?
3
N = 24 N and F = 7 N. Find R′ and tan of the angle R′ makes with N.
4
A block slides with kinetic friction 12 N on a surface with μk = 0.2. Find N and the weight (horizontal surface).
5
Why is it harder to start a heavy box moving than to keep it moving?